คุณยังไม่มีสินค้าในรถเข็น
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900
Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute. The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels.
Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz
Bevel Length
max 55 mm
Bevel Angle
15° – 60°
Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm
Pipe
Ø min 3000 mm
Feeding Speed
0 -1.4 mt/min
สถานะของสินค้า : สินค้าพร้อมส่ง
- Frame in steel and aluminium casting;
- Hardened work plate with sliding rollers;
- Motorized feeding with two polyurethane wheels (90 shore);
- Trolley complete with height adjustment devices, chips protection, chip box, and swivel wheels with brake;
- Possibility to work with the trolley lifted in the presence of irregular floor. Possibility to work also without trolley.
ART. 900 | |
---|---|
Motor power | Three-phase 230/400 Volt, 4kw, 50/60 Hz, 4 pols |
Chamfering adjustment | From 5 mm to 33 mm (50 mm diagonal) |
Chamfering angle | From 15° to 60° |
Plate thickness | From 8 mm to 50 mm |
Cutter | Ø 63 mm Z 5 |
Cutter speed | 750 RPM |
Chamfering speed | From 0 to 1 mt/min |
Working height | 800 mm ÷ 980 mm |
Working direction | Counterclockwise |
Dimensions | 600 x 650 x h 1600 mm |
Application | Steel, stainless steel, cast iron, aluminium, alloy titanium, hardox, super duplex and so on |
Weight | Kg. 175 |
Packing dimension |
920 x 820 x 1580 mm – Kg. 205 |
(*) Different voltage available on request
Cutter
Sketch | F00011 Standard |
Diameter | Ø 63 mm H=40 mm Ø=22 mm (1x) |
Insert | ISO SDHT1204 12,7×12,7 Thickness 4,76 mm |
N° | 5 |
Material | WIDIA |
Insert code | 02045018 |
Option | Coated 02045018/R For light alloy |
Bevelling performances
MAX ACHIEVABLE CHAMFER AT FIRST STEP
|
|||||||||||||||||||
MAX ACHIEVABLE CHAMFER
|
Special versions
- Plate thickness 8/100 mm and 8/200 mm;
- Plate thickness less than 8 mm;
- Cutter speed variator.
แบรนด์ | โอมก้า |