หน้าหลัก /
เครื่องบากขอบ ลบคม metabo รุ่น KFM 9-3 RF

เครื่องบากขอบ ลบคม metabo รุ่น KFM 9-3 RF

มุมมองเพิ่มเติม

เครื่องบากขอบ ลบคม metabo รุ่น KFM 9-3 RF

รหัสสินค้า: 601751700

- Rated input power: 900 W
- Max. chamfer height at 45°: 4 mm / 5/32 "
- Possible radii: R2 / R3

สถานะของสินค้า : สินค้าพร้อมส่ง

42,800 บาท

ติดต่อเรา

วิธีการสั่งซื้อ

0 รีวิว | เป็นคนแรกที่รีวิวสินค้านี้

Compact metal bevelling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
Guide stop for a uniform finish and high quality surface finish when processing straight edges
Bail handle adjusts without tools for secure, even guiding
Metabo Marathon-motor with patented dust protection for long service life
Thumbwheel controlled Vario-Constamatic (VC)-Full wave electronics ideal for working on materials requiring customised speeds, and at speeds which remain almost constant under load
Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
Electronic overload protection, soft start and restart protection
Slim design for ideal handling
With metaBOX, the intelligent solution for transport and storage

The machine shown may differ in equipment and technical details depending on the configuration. Kindly pay attention to delivery scope and product description. Accessories included only if listed in the delivery scope.

Characteristics

No-load speed: 4500 - 11500 rpm
Rated input power: 900 W
Output power: 470 W
Type of edges: Chamfer and radius
Max. chamfer width 45°: 6 mm / 1/4 "
Max. chamfer height at 45°: 4 mm / 5/32 "
Possible radii: R2 / R3
Grading of cutting depth setting: 0.1 mm / 0.00394 "
Curves smallest internal Ø: 13 mm
Weight (without power cable): 2.5 kg / 5.5 lbs
Cable length: 4 m / 13 ft

Vibration

Vibration: 0.7 m/s²
Uncertainty of measurement K: 1.5 m/s²

Noise emission

Sound pressure level: 87 dB(A)
Sound power level (LwA): 98 dB(A)
Uncertainty of measurement K: 3 dB(A)

แบรนด์	เมตาโบ
สิ่งที่ให้มาด้วย	2 carbide indexable inserts 45° chamfer (ISO: DCMT 11 T 304) Guide Stop Screwdriver for Torx screws 15 Bow-type handle metaBOX 215 2 Carbide indexable inserts radius R2 2 Carbide indexable inserts radius R3
น้ำหนัก	2.5