เครื่องบากเหล็กแผ่นและท่อ

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min

ดูรายละเอียดเพิ่มเติม

Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 80°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm

Feeding Speed
0 -1.4 mt/min

ดูรายละเอียดเพิ่มเติม

Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW.  The four feeding wheels and machine design make this one of the most rigid machines on the market.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 77 mm

Bevel Angle
15° – 80° (*) 0°-80°

Plate Thickness
8 – 100mm (*) 8- 200 mm

Feeding Speed
0 -1.4 mt/min

ดูรายละเอียดเพิ่มเติม

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

ดูรายละเอียดเพิ่มเติม

PORTABLE CHAMFER MILLING MACHINE
K-HFM/KaKi 2014-1-8-E

45°, 30°, 60° chamfers

The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.

Application range
· Sheet metal, pipes, flanges, inside contours, bores, etc.
· Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plastics

ดูรายละเอียดเพิ่มเติม

ดูรายละเอียดเพิ่มเติม

ดูรายละเอียดเพิ่มเติม

ดูรายละเอียดเพิ่มเติม

ดูรายละเอียดเพิ่มเติม