คุณยังไม่มีสินค้าในรถเข็น
มุมมองเพิ่มเติม
สว่านแท่นแม่เหล็กงานท่อ Euroboor TUBE.55S/T
Magnetic drilling machine Ø 12 - 55 mm / 16 kg
The portable Euroboor TUBE.55S/T magnetic core drilling machine is suitable for both flat and pipe material and for both drilling and tapping. The magnet of this magnetic core drilling machine offers incredibly strong grip, even on steel as thin as 3 mm. This magnetic core drilling machine cuts holes in metal up to 55 mm and can be used on tube material with a diameter of 80 mm and larger without any effort because of its pivoting magnet. The TUBE.55S/T benefits from Smart Restart technology, a digital display showing the ideal working load and automatic motor shut-off when displacement in any direction is detected by the GYRO-TEC sensor.
สถานะของสินค้า : สินค้าพร้อมส่ง
0 บาท
This machine features:
- Particularly suitable for tapping
- Overheat protection
- Overload protection
- Digital display showing ideal working load
- Smart Restart technology
- Two-speed oil lubricated gearbox
- Right/left rotating functionality
Additional features
- The magnets can be adjusted for the best position on round and flat surfaces
- Easily accessible carbon brushes. Motor will automatically shut-off in case of replacement
- Electronic speed adjustment
- LED load indicators
- Morse Taper 3 spindle with integrated tool cooling and lubrication
- High-accuracy capstan hub
- High-precision height adjustment for:
Low maintenance- Minimal wear correction
- Integrated slide and for:
High accuracy- Enlarged lifecycle
- Minimal vibration
The TUBE.55S/T magnet
The magnet does not require electricity, so all the power goes to the motor. This offers increased safety as the industrial magnetic drill will not release from the target material in the event of an unintentional power loss.
Features:
- No electricity required for magnetic base
- No loss of magnetic grip due to unintentional power loss
- Powerful hold on a wide range of steel thicknesses, curved and flat
- No special attachments needed for flat or curved surfaces
- Highly stable wide stance
- Magnets allow the machine to swing away for hole inspection or debris removal while keeping position
| แบรนด์ | ยูโรบอร์ |
| น้ำหนัก | 16.0 |
เขียนรีวิวสินค้าของคุณเอง
คุณอาจจะสนใจในสินค้าดังต่อไปนี้
-
สว่านแม่เหล็กงานท่อ Euroboor TUBE.30
Magnetic drilling machine Ø 12 - 30 mm / 10.3 kg
The Euroboor TUBE.30 magnetic core drilling machine is suitable for both flat and pipe material. The TUBE.30 with patented shallow-field magnetic technology offers incredibly strong grip, even on steel as thin as 3 mm. This magnetic core drilling machine automatically pivots to conform to any pipe of ø 76.2 mm or larger. The magnet does not require electricity, so all the power goes to the motor. This offers increased safety as the drilling machine will not release from the target material in the event of an unintentional power loss.
0 บาท -
สว่านแม่เหล็กงานท่อแบบใช้ลม Euroboor TUBE.55/AIR (ATEX)
Pneumatic magnetic drilling machine Ø 12 – 55 mm / 16.7 kg
The portable Euroboor TUBE.55/AIR pneumatic drilling machine is equipped with an air-powered, spark-free motor and a non-electric, permanent dual magnet base. Connected to a compressor, it can be used for drilling on round as well as flat workpieces where electrical machines are less convenient or not allowed, especially in areas and spaces with potentially explosive atmospheres, such as offshore and petrochemical industries, as well as mining.
0 บาท
