คุณยังไม่มีสินค้าในรถเข็น
สินค้าทั้งหมด
-
Euroboor MC.3/32
รหัสสินค้า : EU-Euroboor MC.3/32 -
-
Euroboor PAK.250
รหัสสินค้า : EU-Euroboor PAK.250 -
-
Euroboor VAC.002
รหัสสินค้า : EU-Euroboor VAC.002 -
Euroboor VAC.003
รหัสสินค้า : EU-Euroboor VAC.003 -
Euroboor VAC.810
รหัสสินค้า : EU-Euroboor VAC.810 -
Euroboor VAC.820
รหัสสินค้า : EU-Euroboor VAC.820 -
เครื่องบากท่อ ID-Mounted & OD-Mounted Pipe Beveling Machine
รหัสสินค้า : ID-OD-MountedThe ID-Mounted beveling machine operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.
-
เครื่องตัดและบากท่อ Split Frame Pipe Cold Cutting and Beveling Machine
รหัสสินค้า : Split Frame PipeThe clamshell pipe cold cutter is ideal for all types of pipe cold cutting, beveling and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut/bevel, counterbore operations, as well as weld end preparation on open ended pipe, Ranging from 3/4” to 56 inches O.D.(DN20-1400), on most wall thicknesses and material.
