สินค้าทั้งหมด

BIBKO ADD-ON SAND AND GRAVEL SEPARATION

A robust and easy to install separator divides the recycled aggregates into sand and gravel.

0 บาท

BIBKO ADD-ON EXTERNAL BUCKET ELEVATOR

A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.

0 บาท

BIBKO ADD-ON DISCHARGE BUFFER AND PUMP DISCHARGE

The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

0 บาท

BIBKO FILTER PRESS SOLUTIONS

- Purification of residual/wash water with fine particles
- Purification of coloured water
- Simple handling of the filter cake
- Little space required, high filtration performance of the system
- Low operating and maintenance costs

0 บาท

BIBKO COMTEC RECYCLING SYSTEMS

- Recycling capacity of 4, 10, 20 and 30 m³/h
- Dosing buffer and a special extension allow for fast discharge into the machine
- Large capacity wash drum (0.5-3.5 m³) guarantees best performance
- Compact design. No foundation mobile option available.
- Light aluminium cover supported by gas pressure springs
- Heated option available
- Hot-dip galvanised for longevity

0 บาท

BIBKO RWS RECYCLING SYSTEMS

- Recycling capacity of 4, 8, 12 and 18 m³/h
- Compact design. No foundation mobile option available.
- Heated option available
- Hot-dip galvanised for longevity

0 บาท

NODHA CNC pipe cold cutting and beveling machine

เครื่องตัดและบากท่อ Stationary Pipe Cutting & Beveling Machine

Stataionary pipe cold beveling and cutting machine will provide high efficiency in-house pipe pre-fabricate job.

There are light-duty and heavy duty for options, also NODHA provides auxiliary equipments such as converying roller system to help users improve efficiency and reduce labor costs.

CNC pipe beveling machine SPB series, covering pipe diameter range of 2 “-48”, according to ASME B16.25 standard, processing various forms of beveling, to meet the needs of various welding seam: V type beveling, U type beveling, compound beveling and counter boring.

0 บาท

เครื่องตัดและบากท่อ Split Frame Pipe Cold Cutting and Beveling Machine

The clamshell pipe cold cutter is ideal for all types of pipe cold cutting, beveling and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut/bevel, counterbore operations, as well as weld end preparation on open ended pipe, Ranging from 3/4” to 56 inches O.D.(DN20-1400), on most wall thicknesses and material.

0 บาท

เครื่องบากท่อ ID-Mounted & OD-Mounted Pipe Beveling Machine

The ID-Mounted beveling machine operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

0 บาท

บล็อคกระแทกไร้สาย 800Nm Metabo Model : SSW 18 LTX 800 BL พร้อมแบตเตอรี่ 2x5.5Ah+แท่นชาร์จเร็ว

- Battery voltage:18 V
- Maximum torque:800 Nm / 590 ft. lbs
- Bit retainer:Male square 1/2" (12.70 mm)

26,750 บาท

สว่านเจาะ-ต๊าปเกลียวอัตโนมัติ Metabo Model : GB 18 LTX BL Q I พร้อมแบตเตอรี่ 2x5.5Ah+แท่นชาร์จเร็ว

- Battery voltage:18 V
- Maximum torque, soft:65 Nm / 575 in-lbs
- Maximum torque, hard:130 Nm / 1151 ft. lbs
-Max. thread diameter:M 12 (1/2" UNC/UNF)

0 บาท