สินค้าทั้งหมด

EUROBOOR 18V 5Ah Battery

Intended for: EBM.36/P-18V Battery Core DrillWith this powerful battery, you can drill a large number of holes without losing any power. Our HSS14 Battery Test has shown that as many as 25 holes could be drilled in 10mm / 0.39-inch thick S235 steel.Tip: It’s always handy to have an extra battery at home. This way, you can avoid downtime while waiting for your battery to charge.

0 บาท

เครื่องเจาะสว่านแท่นฐานแม่เหล็ก Euroboor ECO.200S/T Magnetic drilling machine

Euroboor ECO.200S/T

Magnetic drilling machine

Ø 12 - 200 mm / 58.8 kg | Magnetic drilling machine ø200 220V

Meet the largest and most powerful magnetic drilling machine in our range: the ECO.200S/T. With a maximum drilling capacity of 200 mm and tapping and countersinking possibilities, this machine gives you the ability to make truly extreme adjustments on workpieces and locations that normally are impossible to do.

The adjustable speed and RL rotation makes this machine perfect for tapping. It also offers the precision needed to match the drill to the annular cutter and the material being drilled. Harder materials such as stainless steel and alloy steels must be drilled at lower speeds whereas softer materials such as aluminum can be drilled at higher speeds.

The ECO.200S/T has a brushless motor, which makes it more efficient than brushed motors.

Brushless motors are more efficient than brushed motors because they eliminate the friction and energy losses associated with brushes. As a result, brushless motors typically produce more power and consume less energy, which can lead to longer battery life and reduced operating costs.

With the ECO.200S/T in your portfolio you have a very versatile machine which give you more power and offer you solutions that others can only dream of.

Recap: Magnetic drilling machine, annular cutters max. dia 200 millimeter, power supply tension 220 – 240 Volt, power supply frequency 50 – 60 Hertz, power supply connection EU plug according CEE 7/7, rotation direction bidirectional.

0 บาท

เหล็กนำศูนย์ ดอกสว่าน Euroboor Pilot Pins

77 mm (3") – 204 mm (8") length

0 บาท

ดอกสว่าน Euroboor TCT Annular Cutter – 200 mm

Drill depth 200 mm Ø 22 – 200 mm

Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 150 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 150 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่าน Euroboor TCT Annular Cutter – 150 mm

Drill depth 150 mm Ø 22 – 200 mm

Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 150 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 150 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่าน Euroboor TCT Annular Cutter – 100 mm

Drill depth 100 mm Ø 12 – 200 mm

Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่าน Euroboor TCT Annular Cutter – 75 mm

Drill depth 75 mm Ø 12 – 50 mm

Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 75 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 75 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่าน Euroboor TCT Annular Cutter – 55 mm

Drill depth 55 mm Ø 12 – 200 mm

Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 55 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 55 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

ดอกสว่าน Euroboor TCT Annular Cutter - 35 mm

Drill depth 35 mm Ø 12 – 100 mm

Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 35 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 35 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

0 บาท

สว่านแท่นแม่เหล็ก Euroboor ECO.100S+/CT แท่นปรับเลื่อนได้แบบแท่นกลึง

Magnetic drilling machine

The Euroboor ECO.100S+/CT magnetic core drilling machine cuts holes up to ø 100 mm and is particularly suitable for tapping and mild milling. The Cross Table gives you the advantage of having a magnetic drilling machine which can be positioned with high accuracy over a range of 110 mm (x-axis) and 120 mm (y-axis) after the magnet is already attached to the surface. Due to dynamic positioning during the drilling procedure, this machine can also be used for mild milling. The milling feature gives you the advantage of being able to create slots. Therefore, you can work on even more complex workpieces with one machine. It has an extremely powerful 1,900 W motor with an oil-lubricated four-speed gearbox and innovative electronics which offer more safety.

0 บาท

สว่านแท่นแม่เหล็กไร้สาย Euroboor EBM.36/P-18V

Cordless magnetic drilling machineØ 12 - 36 mm

Now meet the ultimate mobile magnetic drilling machine: EBM.36/P-18V Powered by a high capacity, rechargeable battery, this magnetic drilling machines provide unparalleled convenience. Because the EBM series are compatible with the Makita platform, you can use the same battery on different cordless tools. This not only saves money, but also gives you the advantage to work on projects without interruptions.

The EBM.36/P-18V will easily drill holes into a wide range of materials, including steel, stainless steel and other metals. The powerful motor and advanced magnetic technology delivers impressive performance, precision, speed and accuracy making it ideal for various metalworking applications. With a maximum drill diameter of 36mm, it is suitable for all common metal drilling jobs.

0 บาท

บล็อคกระแทกไร้สาย 800Nm Metabo Model : SSW 18 LTX 800 BL พร้อมแบตเตอรี่ 2x5.5Ah+แท่นชาร์จเร็ว

- Battery voltage:18 V
- Maximum torque:800 Nm / 590 ft. lbs
- Bit retainer:Male square 1/2" (12.70 mm)

26,750 บาท

สว่านเจาะ-ต๊าปเกลียวอัตโนมัติ Metabo Model : GB 18 LTX BL Q I พร้อมแบตเตอรี่ 2x5.5Ah+แท่นชาร์จเร็ว

- Battery voltage:18 V
- Maximum torque, soft:65 Nm / 575 in-lbs
- Maximum torque, hard:130 Nm / 1151 ft. lbs
-Max. thread diameter:M 12 (1/2" UNC/UNF)

0 บาท