คุณยังไม่มีสินค้าในรถเข็น
สินค้าทั้งหมด
-
บล็อกกระแทกไร้สาย metabo SSW 18 LTX 300 BL (เครื่องเปล่าพร้อมกล่อง)
รหัสสินค้า : 602395840- Speed/torque levels: 12- Battery voltage: 18 V- Maximum torque: 300 Nm / 220 ft. lbs- Bit retainer: Male square 1/2" (12.70 mm) -
บล็อกกระแทกไร้สาย metabo SSW 18 LTX 400 BL (เครื่องเปล่าพร้อมกล่อง metaBOX)
รหัสสินค้า : 602205840- Speed/torque levels: 12
- Battery voltage: 18 V- Maximum torque: 400 Nm / 295 ft. lbs- Bit retainer: Male square 1/2" (12.70 mm) -
สว่านต๊าปเกลียวอัตโนมัติแบบไร้สาย 18V metabo GB 18 LTX BL Q I (เครื่องเปล่าพร้อมกล่อง)
รหัสสินค้า : 602362840- Battery voltage: 18 V
- Maximum torque - soft: 65 Nm / 575 in-lbs
- Maximum torque, hard: 130 Nm / 1151 ft. lbs- Max. thread diameter: M 12 (1/2" UNC/UNF) -
สว่านไขควงกระแทกไร้สาย 18V metabo SB 18 LTX BL Q I (เครื่องเปล่าพร้อมกล่อง)
รหัสสินค้า : 602361840- Battery voltage: 18 V
- Maximum torque - soft: 65 Nm / 575 ft. lbs
- Maximum torque, hard: 130 Nm / 1151 ft. lbs
- Drill-Ø masonry: 16 mm / 5/8 "- Drill Ø steel: 13 mm / 1/2 "
- Drill-Ø soft wood: 68 mm / 2.68 "- No-load speed: 0 - 550 / 0 - 2000 rpm -
เครื่องเดโม่ - เครื่องบากขอบลบคม KOHLE Portable Chamfer Milling Machine K-HFM/KaKi 2014-1-8-E
รหัสสินค้า : 100004PORTABLE CHAMFER MILLING MACHINE
K-HFM/KaKi 2014-1-8-E45°, 30°, 60° chamfers
The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.
Application range
· Sheet metal, pipes, flanges, inside contours, bores, etc.
· Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plastics -
เครื่องเดโม่ - เครื่องหมุนถังหมุนท่ออัตโนมัติ ขนาด 5ตัน Self Aligned Welding Rotator
รหัสสินค้า : GLHZ-5Self-aligned welding rotator including one power and one idle, after load on the work-piece, the roll will auto suit the workpiece, no need to adjust the center distance. The transmission mechanism: motor---multi-step speed adjust----roll, can adopt frequency speed adjust
-
เครื่องเดโม่ - เครื่องบากเหล็กแผ่นและท่ออัตโนมัติ Cevisa CHP-12 + ล้อเข็น
รหัสสินค้า : CHP-12PUnique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP 12 the first model to be sold all over the world with years of international success.
The beveler CHP 12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutesBenefits of plate and tube beveler CHP 12
- High average cutters lifespan : about 1.000 m
- High profitability: Extremely low cost/beveled meter/ minute
- Zero maintenance.
- Self-feed.
- Easy-to-handle and easy to use.
- Flexible.
-
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Storm 500 c/L/a
รหัสสินค้า : 119402Three-phase machines
Our three-phase dust extractors are used for heavy materials where high pressure is required. The vacuum producer is a turbo pump, directly driven by a three-phase motor. Our dependable turbo machines have minimal service requirements and a long life. The characteristic performance of the turbo pump is well suited for heavy cleaning and material transport. The turbo motor generates more vacuum when the resistance increases.
Get rid of large quantites of dust
The DC Storm 500 has a three-phase direct driven turbo pump that is suitable for continuous operation and heavy material transport, source extraction and cleaning. Several improvements have incorporated in it:
- a new efficient semi-automatic filter cleaning system
- for easier transportation it has handles both front and rear and the cyclone can be tilted
- for better ergonomic the handles are adjustable and the cyclone can be tilted for easier filter exchange
- equipped with Intellibag (DC Storm 500c), container (DC Storm 500a) or Longopac (DC Storm 500L
- a new more efficient HEPA filter with a larger filter area
-
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 Twin c/L/a
รหัสสินค้า : 172500DC Tromb 400 Twin c/L/a
With Twin Power against Dust
- Integrated preseparator
- Dust extractor and preseparator are separable
- Long lifetime and robust construction
- High effective cyclone with patented fine filter and HEPA H13 filter for a safe asbestos* removal
- Dust free removal of the plastic sack (intellibag®)
- Accessories for many different tasks
- Holder for accessories and plastic sacks* In accordance with EN 60335-2-69 class H and EN 1822-1 HEPA H13
-
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 c/L/a
รหัสสินค้า : 172000Dust Control DC Tromb 400 c/L/a, Single Phase, 3000watt, Flow max 420 m3/h
- Tackles up to 420 m3/h
- Handles all kinds of fine dusts and materials created on construction sites as well as dust from many other industrial factory processes
- Equipped with a patented self-cleaning filter (washable polyester) and a H13-filter
- Compact and robust - easy to move and transport
- Signal lamp showing when it's time to clean the filter
- Puncture proof wheels of ”non marking-type”, loackable to enable the user to work on uneven ground