สินค้าทั้งหมด

Element 50 Low profile

AS THE LARGEST CAPACITY LOW PROFILE MAG DRILL ON THE MARKET, THE ELEMENT 50 LOW PROFILE COMBINES AN IMPRESSIVE 1200W MOTOR WITH A BODY OF JUST 179MM/100MM/329MM. THIS COMPACT POWERHOUSE CAN REACH ANY AREAS INACCESSIBLE TO A LARGER MODEL WITHOUT COMPROMISING ON PERFORMANCE. CUTTING TO A DEPTH AND DIAMETER OF 50MM, THE DRILL OFFERS A QUICK RELEASE INTERCHANGEABLE HANDLE FOR CONVENIENCE ALONGSIDE INTERNAL COOLING AND CABLING TO REDUCE DOWNTIME AND RISK OF DAMAGE. AS WELL AS THIS, IT IS CAPABLE OF COUNTERSINKING UP TO 30MM (REQUIRES AN EXTENSION ARBOR -RD32059)

THE ELEMENT 40 MAG DRILL

DESIGNED WITH THE SAME INNOVATIVE APPROACH AS THE ELEMENT 30, THE ELEMENT 40 MAG DRILL TAKES THINGS ONE STEP FURTHER. A POWERFUL 1200W MOTOR, WITH A TWO-SPEED MECHANICAL GEARBOX, ALLOWS EVEN A RELATIVELY SMALL DRILL LIKE THE ELEMENT 40 MAG DRILL TO CUT QUICKLY AND EFFICIENTLY.

The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

- Recycling capacity of 4, 8, 12 and 18 m³/h
- Compact design. No foundation mobile option available.
- Heated option available
- Hot-dip galvanised for longevity

The ID-Mounted beveling machine operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

Multi Battery LED 360° Hybrid Work Light 12050 MH (compatible with 18V batteries from 11 different manufacturers, 5m cable, IP54, perfect all-round lighting, without battery, Engineered in Germany)

Multi Battery LED Hybrid Work Light 6050 MH Job Site Light 60W compatible with 18V Batteries from 11 different Powertool Manufacturers (Battery and mains operation possible, 5m RN cable, 6200lm, IP65, 4 switching levels, without battery, Engineered in Germany)

สำหรับงานทำสีรถยนต์ และงานสีทั่วไปที่ต้องการค่าสีที่ใกล้เคียงความจริงมากที่สุด 

LuxPremium LED Akku CRI Headlamp SL 350 AFT / Head Torch with sensor and red light (COB-LED, selectable light colour, with maximum colour rendering CRI15= 96, ideal for detailers, painters and varnishers)

- Super bright detailing headlamp with high quality COB-LED (350lm) thanks to 3-stage changeable light colour 2700K - 4000K - 6500K especially suitable for detailers, painters and varnishers
- Head Torch with infinitely variable focus and different switching levels, headlight: 100% - 40% -10% - SOS - Red and also with rear light: red, red flashing for even better visibility in the dark
- Rechargeable LED headlamp with replaceable Li-Ion battery 3.7 V/2.6 Ah with charge indicator and infinitely variable focus from wide-area close-range light to focused long-range light - with up to 40h burn time
- Thanks to protection class IP44, the headlamp with adjustable tilt angle and lightweight plastic housing is ideal for outdoor use, such as jogging, hiking or assembly work