สินค้าทั้งหมด

Compact fast charger for Euroboor Lithium-ion 5Ah and 9Ah batteries.This charger provides 3Ah at 18V, allowing both batteries to be recharged quickly and ready for use in no time.

Euroboor ECO.200S/T

Magnetic drilling machine

Ø 12 - 200 mm / 58.8 kg | Magnetic drilling machine ø200 220V

Meet the largest and most powerful magnetic drilling machine in our range: the ECO.200S/T. With a maximum drilling capacity of 200 mm and tapping and countersinking possibilities, this machine gives you the ability to make truly extreme adjustments on workpieces and locations that normally are impossible to do.

The adjustable speed and RL rotation makes this machine perfect for tapping. It also offers the precision needed to match the drill to the annular cutter and the material being drilled. Harder materials such as stainless steel and alloy steels must be drilled at lower speeds whereas softer materials such as aluminum can be drilled at higher speeds.

The ECO.200S/T has a brushless motor, which makes it more efficient than brushed motors.

Brushless motors are more efficient than brushed motors because they eliminate the friction and energy losses associated with brushes. As a result, brushless motors typically produce more power and consume less energy, which can lead to longer battery life and reduced operating costs.

With the ECO.200S/T in your portfolio you have a very versatile machine which give you more power and offer you solutions that others can only dream of.

Recap: Magnetic drilling machine, annular cutters max. dia 200 millimeter, power supply tension 220 – 240 Volt, power supply frequency 50 – 60 Hertz, power supply connection EU plug according CEE 7/7, rotation direction bidirectional.

Drill depth 200 mm Ø 22 – 200 mm

Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 150 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 150 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

Drill depth 75 mm Ø 12 – 50 mm

Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 75 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 75 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

Magnetic drilling machine

The Euroboor ECO.100S+/CT magnetic core drilling machine cuts holes up to ø 100 mm and is particularly suitable for tapping and mild milling. The Cross Table gives you the advantage of having a magnetic drilling machine which can be positioned with high accuracy over a range of 110 mm (x-axis) and 120 mm (y-axis) after the magnet is already attached to the surface. Due to dynamic positioning during the drilling procedure, this machine can also be used for mild milling. The milling feature gives you the advantage of being able to create slots. Therefore, you can work on even more complex workpieces with one machine. It has an extremely powerful 1,900 W motor with an oil-lubricated four-speed gearbox and innovative electronics which offer more safety.

Mini Air Bevelling Machine

Compact and lightweight machine on airpower.

The BM45AIR is the smallest bevelling machine in our range. Although it fits in the palm of your hand, don’t underestimate it’s power! The BM45AIR is designed for deburring and rounding edges on steel, stainless steel, aluminum and other materials. Perfectly suitable for machining holes from the internal diameter of 8 mm.

• Compact and great ergonomic design;
• Lightweight machine;
• Including 2x 45° and 2x R1.5 cutting plates;
• Safety lever trigger to prevent accidental starts;
• Bevel depth indicator for precise adjustment of the bevel size;
• 6-speed air speed regulator.

Vacuum drilling machine Ø 12 – 50 mm / 9.9 kg

Innovation is here!

With the new Euroboor VAC.50s+ drilling machine the possibilities are endless. This revolutionary machine for annular cutting and drilling is especially made for horizontal application on non-magnetic surfaces. It actually sticks to almost all smooth surfaces (such as aluminium, stainless steel, plastics, composites, brass, bronze, zinc, lead or even copper) by using unique vacuum technology.

Push your limits and see what the new VAC.50s+ can do for you. The powerful motor with oil-lubricated gearbox ensures that you can drill energy-efficiently, more smoothly and faster with a maximum drill diameter of 50 mm. With our matching Cutting Paste IBP.70 the performance is even better, which saves you time and money.