สินค้าทั้งหมด

-20%

เครื่องใหม่-สว่านแท่นแม่เหล็กไฟฟ้า Model : Element 50 Low profile

Element 50 Low profile

AS THE LARGEST CAPACITY LOW PROFILE MAG DRILL ON THE MARKET, THE ELEMENT 50 LOW PROFILE COMBINES AN IMPRESSIVE 1200W MOTOR WITH A BODY OF JUST 179MM/100MM/329MM. THIS COMPACT POWERHOUSE CAN REACH ANY AREAS INACCESSIBLE TO A LARGER MODEL WITHOUT COMPROMISING ON PERFORMANCE. CUTTING TO A DEPTH AND DIAMETER OF 50MM, THE DRILL OFFERS A QUICK RELEASE INTERCHANGEABLE HANDLE FOR CONVENIENCE ALONGSIDE INTERNAL COOLING AND CABLING TO REDUCE DOWNTIME AND RISK OF DAMAGE. AS WELL AS THIS, IT IS CAPABLE OF COUNTERSINKING UP TO 30MM (REQUIRES AN EXTENSION ARBOR -RD32059)

ราคาปกติ: 53,500 บาท

Special Price 42,800 บาท

-20%

สว่านแท่นแม่เหล็กไฟฟ้า รุ่น COMMANDO 40/3

TTHE COMMANDO 40 MAG DRILL

BOASTING A MORE POWERFUL 1100W MOTOR AND FLEXIBLE 6 SPEED SETTINGS, THE COMMANDO 40 BUILDS UPON ALL THE FUNDAMENTALS WHICH MAKE THE COMMANDO 35 SO VALUABLE, ADDING FURTHER CAPABILITIES AND FUNCTIONS TO AN ALREADY OUTSTANDING DRILL. WITH A DRILL DIAMETER OF UP TO 40MM AND A DEPTH OF CUT AT 50MM, THIS DRILL IS SUITED TO A WIDE RANGE OF PROJECTS, PARTICULARLY COUNTERSINKING AND USING TWIST DRILLS. CONSISTENT WITH THE ROTABROACH EMPHASIS ON SAFETY, THE COMMANDO 40 FEATURES A MECHANICAL CLUTCH, FIXED GUARD AND ELECTRONIC OVERLOAD TO ENSURE THE HIGHEST STANDARDS OF USER SAFETY.

ราคาปกติ: 26,215 บาท

Special Price 20,972 บาท

-20%

สว่านแท่นแม่เหล็กไฟฟ้า รุ่น Element E30 230V

THE ELEMENT 30 MAG DRILL

A LIGHTWEIGHT, RELIABLE SINGLE-SPEED DRILL, THE ELEMENT 30 MAG DRILL PERFECTLY BALANCES POWER AND PORTABILITY WITH EASE. ITS 31MM DIAMETER CUTTING CAPACITY AND 35MM DEPTH OF CUT ARE SUITED TO A WIDE RANGE OF PROJECTS WHILST ITS 850W MOTOR PACKS A RESPECTABLE LEVEL OF POWER INTO ITS LIGHT 12KG FRAME.

ราคาปกติ: 26,750 บาท

Special Price 21,400 บาท

-20%

สว่านแท่นแม่เหล็กไฟฟ้า รุ่น Element E40 230V

THE ELEMENT 40 MAG DRILL

DESIGNED WITH THE SAME INNOVATIVE APPROACH AS THE ELEMENT 30, THE ELEMENT 40 MAG DRILL TAKES THINGS ONE STEP FURTHER. A POWERFUL 1200W MOTOR, WITH A TWO-SPEED MECHANICAL GEARBOX, ALLOWS EVEN A RELATIVELY SMALL DRILL LIKE THE ELEMENT 40 MAG DRILL TO CUT QUICKLY AND EFFICIENTLY.

ราคาปกติ: 29,425 บาท

Special Price 23,540 บาท

BIBKO ADD-ON SAND AND GRAVEL SEPARATION

A robust and easy to install separator divides the recycled aggregates into sand and gravel.

0 บาท

BIBKO ADD-ON EXTERNAL BUCKET ELEVATOR

A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.

0 บาท

BIBKO ADD-ON DISCHARGE BUFFER AND PUMP DISCHARGE

The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

0 บาท

BIBKO FILTER PRESS SOLUTIONS

- Purification of residual/wash water with fine particles
- Purification of coloured water
- Simple handling of the filter cake
- Little space required, high filtration performance of the system
- Low operating and maintenance costs

0 บาท

BIBKO COMTEC RECYCLING SYSTEMS

- Recycling capacity of 4, 10, 20 and 30 m³/h
- Dosing buffer and a special extension allow for fast discharge into the machine
- Large capacity wash drum (0.5-3.5 m³) guarantees best performance
- Compact design. No foundation mobile option available.
- Light aluminium cover supported by gas pressure springs
- Heated option available
- Hot-dip galvanised for longevity

0 บาท

BIBKO RWS RECYCLING SYSTEMS

- Recycling capacity of 4, 8, 12 and 18 m³/h
- Compact design. No foundation mobile option available.
- Heated option available
- Hot-dip galvanised for longevity

0 บาท

NODHA CNC pipe cold cutting and beveling machine

เครื่องตัดและบากท่อ Stationary Pipe Cutting & Beveling Machine

Stataionary pipe cold beveling and cutting machine will provide high efficiency in-house pipe pre-fabricate job.

There are light-duty and heavy duty for options, also NODHA provides auxiliary equipments such as converying roller system to help users improve efficiency and reduce labor costs.

CNC pipe beveling machine SPB series, covering pipe diameter range of 2 “-48”, according to ASME B16.25 standard, processing various forms of beveling, to meet the needs of various welding seam: V type beveling, U type beveling, compound beveling and counter boring.

0 บาท

เครื่องตัดและบากท่อ Split Frame Pipe Cold Cutting and Beveling Machine

The clamshell pipe cold cutter is ideal for all types of pipe cold cutting, beveling and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut/bevel, counterbore operations, as well as weld end preparation on open ended pipe, Ranging from 3/4” to 56 inches O.D.(DN20-1400), on most wall thicknesses and material.

0 บาท

เครื่องบากท่อ ID-Mounted & OD-Mounted Pipe Beveling Machine

The ID-Mounted beveling machine operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

0 บาท

-35%

Battery driven 2-speed torque multiplier

เครื่องเดโม่ - ประแจทอร์คทดแรงแบบไร้สาย รุ่น EA 2/280 (Torque 300-2800Nm)

- alkitronic EA: Battery driven 2-speed torque multiplier for torques from 300 Nm to 2,800 Nm

- Short fastening cycles: fast gear for run down and power gear for highest torques and precision.

- Mobile and always ready for use: compact design for convenient working in limited spaces or without power supply.

- Efficient operation: Fast and easy gear-changing, great torque range – you can choose from 22 torque values.

ราคาปกติ: 303,345 บาท

Special Price 197,175 บาท

ไฟส่องพื้นที่แบบไร้สาย HL3000 ใส่แบตเตอรี่ได้ทุกแบรนด์ตลาด(เครื่องเปล่าไม่รวมแบตเตอรี่และแท่นชาร์จ)

Multi Battery LED Battery Portable Work Light HL 3000 (20W, 1140 + 2160lm, IP54, compatible with 18V batteries from 11 different manufacturers, without battery, Engineered in Germany)

6,955 บาท

โคมไฟตั้งพื้นแบบไร้สายพับเก็บได้ 6050MA ใส่แบตเตอรี่ได้ทุกแบรนด์ตลาด (เครื่องเปล่าไม่รวมแบตเตอรี่และแท่นชาร์จ)

Multi Battery LED Telescopic Work Light 6050 MA (7700lm, IP54, extendable up to 140cm, compatible with 18V batteries from 11 different manufacturers, without battery, Engineered in Germany)

14,445 บาท

โคมไฟสนามแบบไฮบริด 12050MH ใช้กับแบตเตอรี่หรือใช้แบบเสียบปลั๊กไฟ ใส่แบตเตอรี่ได้ทุกแบรนด์ตลาด (เครื่องเปล่าไม่รวมแบตเตอรี่และแท่นชาร์จ)

Multi Battery LED 360° Hybrid Work Light 12050 MH (compatible with 18V batteries from 11 different manufacturers, 5m cable, IP54, perfect all-round lighting, without battery, Engineered in Germany)

19,153 บาท

ไฟส่องพื้นที่แบบไฮบริด 10050MH ใช้กับแบตเตอรี่หรือใช้แบบเสียบปลั๊กไฟ ใส่แบตเตอรี่ได้ทุกแบรนด์ตลาด (เครื่องเปล่าไม่รวมแบตเตอรี่และแท่นชาร์จ)

Multi Battery LED Hybrid work light 10050 MH (LED site light 100W, 12500lm, IP55, work light compatible with 18V batteries 11 different manufacturers, 5m RN cable, without battery, Engineered in Germany)

17,655 บาท

ไฟส่องพื้นที่แบบไร้สาย 3000MA ใส่แบตเตอรี่ได้ทุกแบรนด์ตลาด (เครื่องเปล่าไม่รวมแบตเตอรี่และแท่นชาร์จ)

Multi Battery LED Rechargeable Work Light 3000 MA (LED site light 3150lm, IP65, work light compatible with 18V batteries from 11 different power tool manufacturers, without battery, Engineered in Germany)

8,560 บาท

ไฟส่องพื้นที่แบบไฮบริด 6050MH ใช้กับแบตเตอรี่หรือใช้แบบเสียบปลั๊กไฟ ใส่แบตเตอรี่ได้ทุกแบรนด์ตลาด(เครื่องเปล่าไม่รวมแบตเตอรี่และแท่นชาร์จ)

Multi Battery LED Hybrid Work Light 6050 MH Job Site Light 60W compatible with 18V Batteries from 11 different Powertool Manufacturers (Battery and mains operation possible, 5m RN cable, 6200lm, IP65, 4 switching levels, without battery, Engineered in Germany)

12,840 บาท

ไฟส่องพื้นที่แบบไร้สาย 4000MA ใส่แบตเตอรี่ได้ทุกแบรนด์ตลาด(เครื่องเปล่าไม่รวมแบตเตอรี่และแท่นชาร์จ)

Multi Battery LED Rechargeable Work Light 4000 MA / Job Site Light 40W compatible with 18V Batteries of 11 different Powertool-Manufacturers (4500lm, IP65, 4 switching levels, without battery, Engineered in Germany)

9,095 บาท

ประแจทอร์คทดแรงแบบไร้สาย รุ่น EB

- alkitronic® EB: Battery-driven torque multiplier from 170 Nm to 6,000 Nm / 125 ft.lbs to 4,425 ft.lbs.
- Extremely mobile and always ready for use: Innovative product design for comfortable working - independent of external power supply.
- Permanent higher joint quality by continuous rotation of the square drive.

0 บาท

เครื่องพิมพ์อิงค์เจ็ทแบบพกพา HANDJET EBS-250

Innovative technology and the pioneering imagination of EBS engineers make the HANDJET printer a true work titan. A print height of 8 mm (matrix 5 × 5) to 29 mm (matrix 16 × 10) makes it the most versatile portable printer ever made. You can take it everywhere with you.

0 บาท

เครื่องพิมพ์อิงค์เจ็ทแบบพกพา HANDJET EBS-260

A state-of-the-art portable inkjet printer which takes product marking and coding to another level.

It is light, handy and wireless. The printer is fully portable and versatile – you can print customized messages in almost every language on many different types of surfaces.

It will print text, graphics, 1D and 2D barcodes.

0 บาท