สินค้าทั้งหมด

4 LED Rechargeable Hand Lamp HL DA 40 MH 200lm

Brennenstuhl rechargeable LED Work Light RUFUS / LED Workshop Light outdoor (1500lm, 15W, 5 Modes, Powerbank, USB-Charger,made of die-cast aluminum)

- Extremely robust LED work light with rechargeable battery provides always bright work light in places without power supply - IP65 dust-tight and protected against water-jets, indoor and outdoor use

- LED floodlight with 5 lighting modes 100% - 75% - 50% - 25% - 10% and Powerbank function (USB charging connection 1 A) for devices with USB charging cable such as Smartphones, Tablets, etc.

- The LED floodlight is shockproof and drop-proof (from up to 3m high) - with edge protection made of high-quality plastic and a die-cast aluminum housing - ideal for construction sites, workshops, …

- Workshop light with charging indicator, power bank function for comfortable charging of e.g. smartphones (charging connection type C), and stable, multi-stage folding frame

LED worklight with 360° all-round lighting / Work light 50W (with 5m cable and splash-proof socket, glare-free light, with on/off switch)

- LED Worklight 50W with 5m cable (H07RN-F 3G1,5) provides glare-free, low-shadow 360° room illumination and can also be operated standing, hanging or mounted on a tripod

- LED Floodligh 360° with on/off switch is perfectly suited for permanent outdoor use thanks to the IP54 protection class (dust and splash-proof) and the oil-resistant RN    cable

- Site light made of robust, break- and impact-resistant plastic housing with splash-proof socket with self-closing cover - ideal for painting work or use on construction sites The robust and stable LED work light with practical hook is operated via the on/off switch, which can also be used to select the various light functions (100 - 50 %)

CEE plug 400V / 32A IP44

Screwless connection technology.

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min

- Continuous rotation tightening or loosening of spindles or long threaded bolts. Ideal for bolting connections on plate heat exchangers.
- Torque range of the pneumatic driven types: alkitronic RCL two gear torque multiplier with radial gearing from 590 Nm to 4,840 Nm, alkitronic CLS-SG with tangential gearing from 1,280 Nm to 3,780 Nm.
- Torque range of the electric driven types: alkitronic EF-R / EFCip-R / EF-SG / EFCip-SG: from 560 Nm to 3,780 Nm.

- The hydraulic pump is robust and powered with a unique worldwide proven pneumatic drive.
- Perfect for use in explosion risk areas. Optional with ATEX-certification: II 2 GD c IIB T6.
- Simple operation and infinitely adjustable pressure setting, up to 700 bar.
- Ideal working conditions with an air pressure of 2-7 bar and a flow rate of approx. 10-15 l/sec.