สินค้าทั้งหมด

The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

- Recycling capacity of 4, 8, 12 and 18 m³/h
- Compact design. No foundation mobile option available.
- Heated option available
- Hot-dip galvanised for longevity

The ID-Mounted beveling machine operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

BEVEL LENGTH (L): max 22 mm

BEVEL ANGLE: 15° - 60° (*)0°-60°

High-speed mixer with double agitator for mixtures over 120 kg

- Safe through optimal formed handles and therefore easy handling
- Long lasting with aluminium die casting and powder coated case-hardened gear parts
- Variable electronical speed control

เครื่องขัดผิวคอนกรีตไบเออร์ สำหรับงานขัดผิว, ทำให้เรียบ, เจียรผิว

- สำหรับงานภายในและภายนอก ผนังคอนกรีต พื้นทางเดิน พื้นอุตาหกรรม การลอกกางที่พื้น ลอกสี หรือขัดครีบปูน

- ออกแบบให้ทำงานได้ดีกับเครื่องดูดฝุ่น มีฝุ่นออกมาน้อยมาก (น้อยกว่า of 0.1 mg/m3)

- สามารถขัดปูนพลาสเตอร์ 1 ตารางเมตร ลึก 6 ม.ม. น้อยกว่า 2 นาที

- หัวขัดหมุนทวนกัน ทำให้ง่ายและแม่นยำในการควบคุม

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min