สินค้าทั้งหมด

Element 50 Low profile

AS THE LARGEST CAPACITY LOW PROFILE MAG DRILL ON THE MARKET, THE ELEMENT 50 LOW PROFILE COMBINES AN IMPRESSIVE 1200W MOTOR WITH A BODY OF JUST 179MM/100MM/329MM. THIS COMPACT POWERHOUSE CAN REACH ANY AREAS INACCESSIBLE TO A LARGER MODEL WITHOUT COMPROMISING ON PERFORMANCE. CUTTING TO A DEPTH AND DIAMETER OF 50MM, THE DRILL OFFERS A QUICK RELEASE INTERCHANGEABLE HANDLE FOR CONVENIENCE ALONGSIDE INTERNAL COOLING AND CABLING TO REDUCE DOWNTIME AND RISK OF DAMAGE. AS WELL AS THIS, IT IS CAPABLE OF COUNTERSINKING UP TO 30MM (REQUIRES AN EXTENSION ARBOR -RD32059)

THE ELEMENT 40 MAG DRILL

DESIGNED WITH THE SAME INNOVATIVE APPROACH AS THE ELEMENT 30, THE ELEMENT 40 MAG DRILL TAKES THINGS ONE STEP FURTHER. A POWERFUL 1200W MOTOR, WITH A TWO-SPEED MECHANICAL GEARBOX, ALLOWS EVEN A RELATIVELY SMALL DRILL LIKE THE ELEMENT 40 MAG DRILL TO CUT QUICKLY AND EFFICIENTLY.

The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

- Recycling capacity of 4, 8, 12 and 18 m³/h
- Compact design. No foundation mobile option available.
- Heated option available
- Hot-dip galvanised for longevity

Innovative technology and the pioneering imagination of EBS engineers make the HANDJET printer a true work titan. A print height of 8 mm (matrix 5 × 5) to 29 mm (matrix 16 × 10) makes it the most versatile portable printer ever made. You can take it everywhere with you.

PORTABLE CHAMFER MILLING MACHINE
K-HFM/KaKi 2014-1-8-E

45°, 30°, 60° chamfers

The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.

Application range
· Sheet metal, pipes, flanges, inside contours, bores, etc.
· Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plastics

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min