สินค้าทั้งหมด

The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

- Recycling capacity of 4, 8, 12 and 18 m³/h
- Compact design. No foundation mobile option available.
- Heated option available
- Hot-dip galvanised for longevity

BEVEL LENGTH (L): max 22 mm

BEVEL ANGLE: 15° - 60° (*)0°-60°

Unique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP 12 the first model to be sold all over the world with years of international success. 

The beveler CHP 12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutes

Benefits of plate and tube beveler CHP 12

• High average cutters lifespan : about 1.000 m
• High profitability: Extremely low cost/beveled meter/ minute
• Zero maintenance.
• Self-feed.
• Easy-to-handle and easy to use.
• Flexible.

High-speed mixer with double agitator for mixtures over 120 kg

- Safe through optimal formed handles and therefore easy handling
- Long lasting with aluminium die casting and powder coated case-hardened gear parts
- Variable electronical speed control

เครื่องขัดผิวคอนกรีตไบเออร์ สำหรับงานขัดผิว, ทำให้เรียบ, เจียรผิว

- สำหรับงานภายในและภายนอก ผนังคอนกรีต พื้นทางเดิน พื้นอุตาหกรรม การลอกกางที่พื้น ลอกสี หรือขัดครีบปูน

- ออกแบบให้ทำงานได้ดีกับเครื่องดูดฝุ่น มีฝุ่นออกมาน้อยมาก (น้อยกว่า of 0.1 mg/m3)

- สามารถขัดปูนพลาสเตอร์ 1 ตารางเมตร ลึก 6 ม.ม. น้อยกว่า 2 นาที

- หัวขัดหมุนทวนกัน ทำให้ง่ายและแม่นยำในการควบคุม

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min