สินค้าทั้งหมด

สว่านแม่เหล็กพร้อมแท่นยึดท่อ Euroboor TUBE.30

สว่านแม่เหล็กงานท่อ Euroboor TUBE.30

Magnetic drilling machine Ø 12 - 30 mm / 10.3 kg

The Euroboor TUBE.30 magnetic core drilling machine is suitable for both flat and pipe material. The TUBE.30 with patented shallow-field magnetic technology offers incredibly strong grip, even on steel as thin as 3 mm. This magnetic core drilling machine automatically pivots to conform to any pipe of ø 76.2 mm or larger. The magnet does not require electricity, so all the power goes to the motor. This offers increased safety as the drilling machine will not release from the target material in the event of an unintentional power loss.

0 บาท

สว่านแท่นแม่เหล็กพร้อมแท่นยึดท่อ Euroboor TUBE.55S/T

สว่านแท่นแม่เหล็กงานท่อ Euroboor TUBE.55S/T

Magnetic drilling machine Ø 12 - 55 mm / 16 kg

The portable Euroboor TUBE.55S/T magnetic core drilling machine is suitable for both flat and pipe material and for both drilling and tapping. The magnet of this magnetic core drilling machine offers incredibly strong grip, even on steel as thin as 3 mm. This magnetic core drilling machine cuts holes in metal up to 55 mm and can be used on tube material with a diameter of 80 mm and larger without any effort because of its pivoting magnet. The TUBE.55S/T benefits from Smart Restart technology, a digital display showing the ideal working load and automatic motor shut-off when displacement in any direction is detected by the GYRO-TEC sensor.

0 บาท

สว่านแม่เหล็กงานท่อแบบใช้ลม Euroboor TUBE.55/AIR (ATEX)

Pneumatic magnetic drilling machine Ø 12 – 55 mm / 16.7 kg

The portable Euroboor TUBE.55/AIR pneumatic drilling machine is equipped with an air-powered, spark-free motor and a non-electric, permanent dual magnet base. Connected to a compressor, it can be used for drilling on round as well as flat workpieces where electrical machines are less convenient or not allowed, especially in areas and spaces with potentially explosive atmospheres, such as offshore and petrochemical industries, as well as mining.

0 บาท

สว่านแม่เหล็กแบบใช้ลม Euroboor AIR.55 ATEX

Pneumatic magnetic drilling machine Ø 12 – 55 mm / 16.5 kg

The portable Euroboor AIR.55 pneumatic drilling machine is equipped with an air-powered, spark-free motor and a non-electric, permanent magnet base. Connected to a compressor, it can be used for drilling on flat workpieces where electrical machines are less convenient or not allowed, especially in areas and spaces with potentially explosive atmospheres, such as offshore and petrochemical industries, as well as mining.

0 บาท

สว่านเจาะรางรถไฟ Euroboor RAIL.40S

Rail drilling machine Ø 12 - 36 mm / 12 kg

The Euroboor RAIL.40S rail drilling machine is specifically designed for drilling in rails. Our electric rail drilling machine is available in various rail adapter versions, ensuring you can always choose the right rail adapter for your drilling job. This machine is suitable for drilling holes up to 36 mm. Our portable RAIL.40S rail drilling machine has a powerful 1,150 W high efficiency motor, with less heat generation and thus a longer lifespan.

Our RAIL.40S rail drilling machine comes with six different rail adapter versions: S49, S54, TR68, UIC50, UIC54 and UIC60.

0 บาท

สว่านเจาะรางรถไฟ Euroboor RAIL.60S

Rail drilling machine Ø 12 - 36 mm / 14.4 kg

The Euroboor RAIL.60S rail drilling machine is available with various rail adapter versions. This means there is always a version suitable for the rail type of your drilling job. Our rail track drilling machine has a powerful 1,600 W motor, with overheat protection, which allows the portable industrial rail drilling machine to drill holes up to 36 mm. The optimized slide makes drilling with the RAIL.60S easy and more precise.

RAIL.60S rail drilling machine comes with six different rail adapter versions: S49, S54, TR68, UIC50, UIC54 and UIC60.

0 บาท

ไขควงกระแทกไร้สาย metabo SSD 18 LT 200 BL (เครื่องเปล่าพร้อมกล่อง)

- Speed/torque levels: 3
- Battery voltage: 18 V

- Maximum torque: 200 Nm

- Bit retainer: Hexagon recess 1/4" (6.35 mm)

ราคาปกติ: 6,955 บาท

Special Price 5,564 บาท

-20%

บล็อกกระแทกไร้สาย metabo SSD 18 LTX 200 BL (เครื่องเปล่าพร้อมกล่อง metaBOX)

ไขควงกระแทกไร้สาย metabo SSD 18 LTX 200 BL (เครื่องเปล่าพร้อมกล่อง)

- Speed/torque levels: 12

- Battery voltage: 18 V

- Maximum torque: 200 Nm / 150 ft. lbs

- Bit retainer: Hexagon recess 1/4" (6.35 mm)

ราคาปกติ: 8,025 บาท

Special Price 6,420 บาท

-20%

บล็อกกระแทกไร้สาย metabo SSW 18 LT 300 BL (เครื่องเปล่าพร้อมกล่อง)

- Speed/torque levels: 3

- Battery voltage: 18 V

- Maximum torque: 300 Nm

- Torque Adjust: 3 steps

- Bit retainer: Male square 1/2" (12.70 mm)

ราคาปกติ: 7,169 บาท

Special Price 5,735 บาท

-20%

บล็อกกระแทกไร้สาย metabo SSW 18 LTX 300 BL (เครื่องเปล่าพร้อมกล่อง)

- Speed/torque levels: 12

- Battery voltage: 18 V

- Maximum torque: 300 Nm / 220 ft. lbs

- Bit retainer: Male square 1/2" (12.70 mm)

ราคาปกติ: 9,630 บาท

Special Price 7,704 บาท

บล็อกกระแทกไร้สาย metabo SSW 18 LTX 400 BL (เครื่องเปล่าพร้อมกล่อง metaBOX)

- Speed/torque levels: 12
- Battery voltage: 18 V

- Maximum torque: 400 Nm / 295 ft. lbs

- Bit retainer: Male square 1/2" (12.70 mm)

13,250 บาท

สว่านต๊าปเกลียวอัตโนมัติแบบไร้สาย 18V metabo GB 18 LTX BL Q I (เครื่องเปล่าพร้อมกล่อง)

- Battery voltage: 18 V
- Maximum torque - soft: 65 Nm / 575 in-lbs
- Maximum torque, hard: 130 Nm / 1151 ft. lbs

- Max. thread diameter: M 12 (1/2" UNC/UNF)

15,515 บาท

-20%

สว่านไขควงกระแทกไร้สาย 18V metabo SB 18 LTX BL Q I (เครื่องเปล่าพร้อมกล่อง)

- Battery voltage: 18 V
- Maximum torque - soft: 65 Nm / 575 ft. lbs
- Maximum torque, hard: 130 Nm / 1151 ft. lbs
- Drill-Ø masonry: 16 mm / 5/8 "

- Drill Ø steel: 13 mm / 1/2 "
- Drill-Ø soft wood: 68 mm / 2.68 "

- No-load speed: 0 - 550 / 0 - 2000 rpm

ราคาปกติ: 12,840 บาท

Special Price 10,272 บาท

เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 930 Reverse

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

0 บาท

เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Big Plus

Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW. The four feeding wheels and machine design make this one of the most rigid machines on the market.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 77 mm

Bevel Angle
15° – 80° (*) 0°-80°

Plate Thickness
8 – 100mm (*) 8- 200 mm

Feeding Speed
0 -1.4 mt/min

0 บาท

เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Plus

Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm.

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 80°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm

Feeding Speed
0 -1.4 mt/min

0 บาท

เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute. The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels.

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min

0 บาท