สินค้าทั้งหมด

Pneumatic magnetic drilling machine Ø 12 – 55 mm / 16.7 kg

The portable Euroboor TUBE.55/AIR pneumatic drilling machine is equipped with an air-powered, spark-free motor and a non-electric, permanent dual magnet base. Connected to a compressor, it can be used for drilling on round as well as flat workpieces where electrical machines are less convenient or not allowed, especially in areas and spaces with potentially explosive atmospheres, such as offshore and petrochemical industries, as well as mining.

Rail drilling machine Ø 12 - 36 mm / 14.4 kg

The Euroboor RAIL.60S rail drilling machine is available with various rail adapter versions. This means there is always a version suitable for the rail type of your drilling job. Our rail track drilling machine has a powerful 1,600 W motor, with overheat protection, which allows the portable industrial rail drilling machine to drill holes up to 36 mm. The optimized slide makes drilling with the RAIL.60S easy and more precise.

RAIL.60S rail drilling machine comes with six different rail adapter versions: S49, S54, TR68, UIC50, UIC54 and UIC60.

Dust Control DC Tromb 400 c/L/a, Single Phase, 3000watt, Flow max 420 m3/h

- Tackles up to 420 m3/h 
- Handles all kinds of fine dusts and materials created on construction sites as well as dust from many other industrial factory processes
- Equipped with a patented self-cleaning filter (washable polyester) and a H13-filter 
- Compact and robust - easy to move and transport
- Signal lamp showing when it's time to clean the filter
- Puncture proof wheels of ”non marking-type”, loackable to enable the user to work on uneven ground

Dust Control DC1800 H Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 20L Container

High-speed mixer with double agitator for mixtures over 120 kg

- Safe through optimal formed handles and therefore easy handling
- Long lasting with aluminium die casting and powder coated case-hardened gear parts
- Variable electronical speed control

เครื่องขัดผิวคอนกรีตไบเออร์ สำหรับงานขัดผิว, ทำให้เรียบ, เจียรผิว

- สำหรับงานภายในและภายนอก ผนังคอนกรีต พื้นทางเดิน พื้นอุตาหกรรม การลอกกางที่พื้น ลอกสี หรือขัดครีบปูน

- ออกแบบให้ทำงานได้ดีกับเครื่องดูดฝุ่น มีฝุ่นออกมาน้อยมาก (น้อยกว่า of 0.1 mg/m3)

- สามารถขัดปูนพลาสเตอร์ 1 ตารางเมตร ลึก 6 ม.ม. น้อยกว่า 2 นาที

- หัวขัดหมุนทวนกัน ทำให้ง่ายและแม่นยำในการควบคุม

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min