สินค้าทั้งหมด

CEE plug 400V / 32A IP44

Screwless connection technology.

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min

Garant CEE 2 IP44 cable reel for site & industry 25m H07RN-F 3G2,5

-  2-socket cable reel drum with 25m cable length H07RN-F 3G2,5 and IP44 protection against splashing of water
-  Extension cable made from Rubber-Neoprene for outdoors and use on sites
-  Ergonomic cable guide handle for easy rewinding, carrying, and cable storage
-  Robust cable reel (230 V/16 A) with single pole safety cut-off and overheating protection