คุณยังไม่มีสินค้าในรถเข็น
สินค้าทั้งหมด
-
Euroboor Armature Kit
The Euroboor armature kit consists of original parts for the maintenance of your magnetic core drill. We therefore recommend that you only use this official Euroboor kit to maintain your machine warranty. There is a suitable armature kit for all Euroboor magnetic core drilling machines.
0 บาท -
EUROBOOR EBC1 Charger for EBM.36/P-18V
Compact fast charger for Euroboor Lithium-ion 5Ah and 9Ah batteries.This charger provides 3Ah at 18V, allowing both batteries to be recharged quickly and ready for use in no time.
0 บาท -
EUROBOOR 18V 9Ah Battery
Intended for: EBM.36/P-18V Battery Core DrillWith this powerful battery, you can drill a large number of holes without losing any power. Our HSS14 Battery Test has shown that as many as 44 holes could be drilled in 10mm (0.39-inch) thick S235 steel.Tip: It’s always handy to have an extra battery at home. This way, you can avoid downtime while waiting for your battery to charge.
0 บาท -
EUROBOOR 18V 5Ah Battery
Intended for: EBM.36/P-18V Battery Core DrillWith this powerful battery, you can drill a large number of holes without losing any power. Our HSS14 Battery Test has shown that as many as 25 holes could be drilled in 10mm / 0.39-inch thick S235 steel.Tip: It’s always handy to have an extra battery at home. This way, you can avoid downtime while waiting for your battery to charge.
0 บาท -
เครื่องเจาะสว่านแท่นฐานแม่เหล็ก Euroboor ECO.200S/T Magnetic drilling machine
Euroboor ECO.200S/T
Magnetic drilling machine
Ø 12 - 200 mm / 58.8 kg | Magnetic drilling machine ø200 220V
Meet the largest and most powerful magnetic drilling machine in our range: the ECO.200S/T. With a maximum drilling capacity of 200 mm and tapping and countersinking possibilities, this machine gives you the ability to make truly extreme adjustments on workpieces and locations that normally are impossible to do.
The adjustable speed and RL rotation makes this machine perfect for tapping. It also offers the precision needed to match the drill to the annular cutter and the material being drilled. Harder materials such as stainless steel and alloy steels must be drilled at lower speeds whereas softer materials such as aluminum can be drilled at higher speeds.
The ECO.200S/T has a brushless motor, which makes it more efficient than brushed motors.
Brushless motors are more efficient than brushed motors because they eliminate the friction and energy losses associated with brushes. As a result, brushless motors typically produce more power and consume less energy, which can lead to longer battery life and reduced operating costs.
With the ECO.200S/T in your portfolio you have a very versatile machine which give you more power and offer you solutions that others can only dream of.
Recap: Magnetic drilling machine, annular cutters max. dia 200 millimeter, power supply tension 220 – 240 Volt, power supply frequency 50 – 60 Hertz, power supply connection EU plug according CEE 7/7, rotation direction bidirectional.
0 บาท -
เครื่องเดโม่ - ประแจทอร์คทดแรงแบบไร้สาย รุ่น EA 2/280 (Torque 300-2800Nm)
- alkitronic EA: Battery driven 2-speed torque multiplier for torques from 300 Nm to 2,800 Nm
- Short fastening cycles: fast gear for run down and power gear for highest torques and precision.
- Mobile and always ready for use: compact design for convenient working in limited spaces or without power supply.
- Efficient operation: Fast and easy gear-changing, great torque range – you can choose from 22 torque values.ราคาปกติ: 303,345 บาท
Special Price 197,175 บาท
-
ดอกสว่าน Euroboor TCT Annular Cutter – 200 mm
Drill depth 200 mm Ø 22 – 200 mm
Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 150 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 150 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.
0 บาท -
ดอกสว่าน Euroboor TCT Annular Cutter – 150 mm
Drill depth 150 mm Ø 22 – 200 mm
Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 150 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 150 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.
0 บาท