สินค้าทั้งหมด

LED worklight with 360° all-round lighting / Work light 50W (with 5m cable and splash-proof socket, glare-free light, with on/off switch)

- LED Worklight 50W with 5m cable (H07RN-F 3G1,5) provides glare-free, low-shadow 360° room illumination and can also be operated standing, hanging or mounted on a tripod

- LED Floodligh 360° with on/off switch is perfectly suited for permanent outdoor use thanks to the IP54 protection class (dust and splash-proof) and the oil-resistant RN    cable

- Site light made of robust, break- and impact-resistant plastic housing with splash-proof socket with self-closing cover - ideal for painting work or use on construction sites The robust and stable LED work light with practical hook is operated via the on/off switch, which can also be used to select the various light functions (100 - 50 %)

Dust Control DC Tromb 400 c/L/a, Single Phase, 3000watt, Flow max 420 m3/h

- Tackles up to 420 m3/h 
- Handles all kinds of fine dusts and materials created on construction sites as well as dust from many other industrial factory processes
- Equipped with a patented self-cleaning filter (washable polyester) and a H13-filter 
- Compact and robust - easy to move and transport
- Signal lamp showing when it's time to clean the filter
- Puncture proof wheels of ”non marking-type”, loackable to enable the user to work on uneven ground

Dust Control DC1800 H Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 20L Container

CEE plug 400V / 32A IP44

Screwless connection technology.

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min

- Continuous rotation tightening or loosening of spindles or long threaded bolts. Ideal for bolting connections on plate heat exchangers.
- Torque range of the pneumatic driven types: alkitronic RCL two gear torque multiplier with radial gearing from 590 Nm to 4,840 Nm, alkitronic CLS-SG with tangential gearing from 1,280 Nm to 3,780 Nm.
- Torque range of the electric driven types: alkitronic EF-R / EFCip-R / EF-SG / EFCip-SG: from 560 Nm to 3,780 Nm.

- The hydraulic pump is robust and powered with a unique worldwide proven pneumatic drive.
- Perfect for use in explosion risk areas. Optional with ATEX-certification: II 2 GD c IIB T6.
- Simple operation and infinitely adjustable pressure setting, up to 700 bar.
- Ideal working conditions with an air pressure of 2-7 bar and a flow rate of approx. 10-15 l/sec.