คุณยังไม่มีสินค้าในรถเข็น

คุณยังไม่มีสินค้าในรถเข็น

สินค้าทั้งหมด

สินค้าทั้งหมด

ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

หน้า:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
ต่อหน้า
  • Euroboor Armature Kit

    The Euroboor armature kit consists of original parts for the maintenance of your magnetic core drill. We therefore recommend that you only use this official Euroboor kit to maintain your machine warranty. There is a suitable armature kit for all Euroboor magnetic core drilling machines.

    0 บาท
  • Euroboor 1/2UNF-MC3

    Morse taper 3 to 1/2" x 20 UNFSpindle connection

    0 บาท
  • Euroboor 1/2UNF-MC2

    Morse taper 2 to 1/2" x 20 UNFSpindle connection

    0 บาท
  • EUROBOOR EBC1 Charger for EBM.36/P-18V

    Compact fast charger for Euroboor Lithium-ion 5Ah and 9Ah batteries.This charger provides 3Ah at 18V, allowing both batteries to be recharged quickly and ready for use in no time.

    0 บาท
  • EUROBOOR 18V 9Ah Battery

    Intended for: EBM.36/P-18V Battery Core DrillWith this powerful battery, you can drill a large number of holes without losing any power. Our HSS14 Battery Test has shown that as many as 44 holes could be drilled in 10mm (0.39-inch) thick S235 steel.Tip: It’s always handy to have an extra battery at home. This way, you can avoid downtime while waiting for your battery to charge.

    0 บาท
  • EUROBOOR 18V 5Ah Battery

    Intended for: EBM.36/P-18V Battery Core DrillWith this powerful battery, you can drill a large number of holes without losing any power. Our HSS14 Battery Test has shown that as many as 25 holes could be drilled in 10mm / 0.39-inch thick S235 steel.Tip: It’s always handy to have an extra battery at home. This way, you can avoid downtime while waiting for your battery to charge.

    0 บาท
  • เครื่องเจาะสว่านแท่นฐานแม่เหล็ก Euroboor ECO.200S/T Magnetic drilling machine

    Euroboor ECO.200S/T

    Magnetic drilling machine

    Ø 12 - 200 mm / 58.8 kg | Magnetic drilling machine ø200 220V

    Meet the largest and most powerful magnetic drilling machine in our range: the ECO.200S/T. With a maximum drilling capacity of 200 mm and tapping and countersinking possibilities, this machine gives you the ability to make truly extreme adjustments on workpieces and locations that normally are impossible to do.

    The adjustable speed and RL rotation makes this machine perfect for tapping. It also offers the precision needed to match the drill to the annular cutter and the material being drilled. Harder materials such as stainless steel and alloy steels must be drilled at lower speeds whereas softer materials such as aluminum can be drilled at higher speeds.

    The ECO.200S/T has a brushless motor, which makes it more efficient than brushed motors.

    Brushless motors are more efficient than brushed motors because they eliminate the friction and energy losses associated with brushes. As a result, brushless motors typically produce more power and consume less energy, which can lead to longer battery life and reduced operating costs.

    With the ECO.200S/T in your portfolio you have a very versatile machine which give you more power and offer you solutions that others can only dream of.

    Recap: Magnetic drilling machine, annular cutters max. dia 200 millimeter, power supply tension 220 – 240 Volt, power supply frequency 50 – 60 Hertz, power supply connection EU plug according CEE 7/7, rotation direction bidirectional.

    0 บาท
  • -35%
    Battery driven 2-speed torque multiplier Battery driven 2-speed torque multiplier

    เครื่องเดโม่ - ประแจทอร์คทดแรงแบบไร้สาย รุ่น EA 2/280 (Torque 300-2800Nm)

    -  alkitronic EA: Battery driven 2-speed torque multiplier for torques from 300 Nm to 2,800 Nm 

    -  Short fastening cycles: fast gear for run down and power gear for highest torques and precision.

    -  Mobile and always ready for use: compact design for convenient working in limited spaces or without power supply.

    -  Efficient operation: Fast and easy gear-changing, great torque range – you can choose from 22 torque values.

    ราคาปกติ: 303,345 บาท

    Special Price 197,175 บาท

  • เหล็กนำศูนย์ ดอกสว่าน Euroboor Pilot Pins

    77 mm (3") – 204 mm (8") length

    0 บาท
  • ดอกสว่าน Euroboor TCT Annular Cutter – 200 mm

    Drill depth 200 mm Ø 22 – 200 mm

    Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 150 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 150 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่าน Euroboor TCT Annular Cutter – 150 mm

    Drill depth 150 mm Ø 22 – 200 mm

    Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 150 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 150 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่าน Euroboor TCT Annular Cutter – 100 mm

    Drill depth 100 mm Ø 12 – 200 mm

    Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่าน Euroboor TCT Annular Cutter – 75 mm

    Drill depth 75 mm Ø 12 – 50 mm

    Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 75 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 75 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่าน Euroboor TCT Annular Cutter – 55 mm

    Drill depth 55 mm Ø 12 – 200 mm

    Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 55 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 55 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • ดอกสว่าน Euroboor TCT Annular Cutter - 35 mm

    Drill depth 35 mm Ø 12 – 100 mm

    Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 35 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 35 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

    0 บาท
  • สว่านแท่นแม่เหล็ก Euroboor ECO.100S+/CT แท่นปรับเลื่อนได้แบบแท่นกลึง

    Magnetic drilling machine

    The Euroboor ECO.100S+/CT magnetic core drilling machine cuts holes up to ø 100 mm and is particularly suitable for tapping and mild milling. The Cross Table gives you the advantage of having a magnetic drilling machine which can be positioned with high accuracy over a range of 110 mm (x-axis) and 120 mm (y-axis) after the magnet is already attached to the surface. Due to dynamic positioning during the drilling procedure, this machine can also be used for mild milling. The milling feature gives you the advantage of being able to create slots. Therefore, you can work on even more complex workpieces with one machine. It has an extremely powerful 1,900 W motor with an oil-lubricated four-speed gearbox and innovative electronics which offer more safety.

    0 บาท
  • สว่านแท่นแม่เหล็กไร้สาย Euroboor EBM.36/P-18V

    Cordless magnetic drilling machineØ 12 - 36 mm

    Now meet the ultimate mobile magnetic drilling machine: EBM.36/P-18V Powered by a high capacity, rechargeable battery, this magnetic drilling machines provide unparalleled convenience. Because the EBM series are compatible with the Makita platform, you can use the same battery on different cordless tools. This not only saves money, but also gives you the advantage to work on projects without interruptions.

    The EBM.36/P-18V will easily drill holes into a wide range of materials, including steel, stainless steel and other metals. The powerful motor and advanced magnetic technology delivers impressive performance, precision, speed and accuracy making it ideal for various metalworking applications. With a maximum drill diameter of 36mm, it is suitable for all common metal drilling jobs.

    0 บาท
  • ประแจทอร์คทดแรงแบบไร้สาย รุ่น EB

    - alkitronic® EB: Battery-driven torque multiplier from 170 Nm to 6,000 Nm / 125 ft.lbs to 4,425 ft.lbs.
    - Extremely mobile and always ready for use: Innovative product design for comfortable working - independent of external power supply.
    - Permanent higher joint quality by continuous rotation of the square drive.

    0 บาท
  • เครื่องบากลบคมแบบใช้ลม Euroboor BM45AIR

    Mini Air Bevelling Machine

    Compact and lightweight machine on airpower.

    The BM45AIR is the smallest bevelling machine in our range. Although it fits in the palm of your hand, don’t underestimate it’s power! The BM45AIR is designed for deburring and rounding edges on steel, stainless steel, aluminum and other materials. Perfectly suitable for machining holes from the internal diameter of 8 mm.

    • Compact and great ergonomic design;
    • Lightweight machine;
    • Including 2x 45° and 2x R1.5 cutting plates;
    • Safety lever trigger to prevent accidental starts;
    • Bevel depth indicator for precise adjustment of the bevel size;
    • 6-speed air speed regulator.
    0 บาท
  • เครื่องบากขอบลบคมเหล็ก Euroboor B45S

    Euroboor B45S

    Bevelling machine

    1,250 W / 4.4 kg

    The Euroboor B45S benefits from quick and easy bevel width adjustment with clear indicator. This bevelling machine has a maximum bevel width of 6 mm, at an angle of 45°.The spindle speed adjustment range makes the B45S suitable for various materials. The electronic speed stabilization and overheat protection take care of creating perfect finishes with the greatest of ease.

    0 บาท
  • เครื่องบากแผ่นเหล็ก แผ่นสแตนเลส ปรับรอบได้ Euroboor B60S

    Bevelling machine with variable speed

    1,800 W / 24.5 kg

    The Euroboor B60S bevelling machine has a maximum bevel width of 24 mm, at an angle of 45˚, which is unique in the market. Furthermore, this machine benefits from an exceptional powerful 1800 W motor making this machine very suitable for not only cutting stainless steel but a wide variety of materials. The Euroboor B60S is equipped with overload protection and has a variable speed, including material type indicator. This machine is suitable to cut both plate and pipe material.

    0 บาท
  • สว่านแท่นสูญญากาศ Euroboor Vac50.S+

    Vacuum drilling machine Ø 12 – 50 mm / 9.9 kg

    Innovation is here!

    With the new Euroboor VAC.50s+ drilling machine the possibilities are endless. This revolutionary machine for annular cutting and drilling is especially made for horizontal application on non-magnetic surfaces. It actually sticks to almost all smooth surfaces (such as aluminium, stainless steel, plastics, composites, brass, bronze, zinc, lead or even copper) by using unique vacuum technology.

    Push your limits and see what the new VAC.50s+ can do for you. The powerful motor with oil-lubricated gearbox ensures that you can drill energy-efficiently, more smoothly and faster with a maximum drill diameter of 50 mm. With our matching Cutting Paste IBP.70 the performance is even better, which saves you time and money.

    0 บาท
  • สว่านแท่นแม่เหล็ก Euroboor ECO.36 สำหรับเจาะในที่จำกัด

    Low profile magnetic drilling machine Ø 12 - 36 mm / 10.3 kg

    The Euroboor ECO.36 magnetic core drilling machine is the lowest drilling machine in the market, measuring only 165 mm in height. This magnetic core drilling machine is perfect for drilling in spaces with limited heights such as H-beams, steel structures, plates, profiles, etc. The portable ECO.36 is equipped with a powerful magnet, user friendly Quick Connect cutter fitment system, and easy release / lock feed handle for both left and right operation.

    0 บาท
  • สว่านแท่นแม่เหล็กไฟฟ้า Euroboor ECO.40S

    Magnetic drilling machine Ø 12 - 40 mm / 10.5 kg

    The Euroboor ECO.40S magnetic core drilling machine is the lightest ø 40 mm drilling machine in the market, fitting cutters up to 110 mm in length. Our portable ECO.40S magnetic core drilling machine has a powerful 1,150 W high efficiency motor, with less heat generation and thus a longer lifespan. This drilling machine’s oil lubricated one-speed gearbox ensures optimal motor efficiency and lifetime of key components.

    0 บาท
ตั้งค่าเป็นเรียงจากน้อยไปมาก

ตาราง รายการ

หน้า:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
ต่อหน้า
expand_less