สินค้าทั้งหมด

BEVEL LENGTH (L): max 22 mm

BEVEL ANGLE: 15° - 60° (*)0°-60°

ดูรายละเอียดเพิ่มเติม

PORTABLE CHAMFER MILLING MACHINE
K-HFM/KaKi 2014-1-8-E

45°, 30°, 60° chamfers

The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.

Application range
· Sheet metal, pipes, flanges, inside contours, bores, etc.
· Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plastics

ดูรายละเอียดเพิ่มเติม

Self-aligned welding rotator including one power and one idle, after load on the work-piece, the roll will auto suit the workpiece, no need to adjust the center distance. The transmission mechanism: motor---multi-step speed adjust----roll, can adopt frequency speed adjust

ดูรายละเอียดเพิ่มเติม

Unique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP 12 the first model to be sold all over the world with years of international success. 

The beveler CHP 12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutes

Benefits of plate and tube beveler CHP 12

• High average cutters lifespan : about 1.000 m
• High profitability: Extremely low cost/beveled meter/ minute
• Zero maintenance.
• Self-feed.
• Easy-to-handle and easy to use.
• Flexible.

ดูรายละเอียดเพิ่มเติม

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

ดูรายละเอียดเพิ่มเติม

Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW.  The four feeding wheels and machine design make this one of the most rigid machines on the market.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 77 mm

Bevel Angle
15° – 80° (*) 0°-80°

Plate Thickness
8 – 100mm (*) 8- 200 mm

Feeding Speed
0 -1.4 mt/min

ดูรายละเอียดเพิ่มเติม

Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 80°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm

Feeding Speed
0 -1.4 mt/min

ดูรายละเอียดเพิ่มเติม