สินค้าทั้งหมด

BIBKO ADD-ON SAND AND GRAVEL SEPARATION

A robust and easy to install separator divides the recycled aggregates into sand and gravel.

0 บาท

BIBKO ADD-ON EXTERNAL BUCKET ELEVATOR

A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.

0 บาท

BIBKO ADD-ON DISCHARGE BUFFER AND PUMP DISCHARGE

The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

0 บาท

BIBKO FILTER PRESS SOLUTIONS

- Purification of residual/wash water with fine particles
- Purification of coloured water
- Simple handling of the filter cake
- Little space required, high filtration performance of the system
- Low operating and maintenance costs

0 บาท

BIBKO COMTEC RECYCLING SYSTEMS

- Recycling capacity of 4, 10, 20 and 30 m³/h
- Dosing buffer and a special extension allow for fast discharge into the machine
- Large capacity wash drum (0.5-3.5 m³) guarantees best performance
- Compact design. No foundation mobile option available.
- Light aluminium cover supported by gas pressure springs
- Heated option available
- Hot-dip galvanised for longevity

0 บาท

BIBKO RWS RECYCLING SYSTEMS

- Recycling capacity of 4, 8, 12 and 18 m³/h
- Compact design. No foundation mobile option available.
- Heated option available
- Hot-dip galvanised for longevity

0 บาท

-35%

Battery driven 2-speed torque multiplier

เครื่องเดโม่ - ประแจทอร์คทดแรงแบบไร้สาย รุ่น EA 2/280 (Torque 300-2800Nm)

- alkitronic EA: Battery driven 2-speed torque multiplier for torques from 300 Nm to 2,800 Nm

- Short fastening cycles: fast gear for run down and power gear for highest torques and precision.

- Mobile and always ready for use: compact design for convenient working in limited spaces or without power supply.

- Efficient operation: Fast and easy gear-changing, great torque range – you can choose from 22 torque values.

ราคาปกติ: 303,345 บาท

Special Price 197,175 บาท

ประแจทอร์คทดแรงแบบไร้สาย รุ่น EB

- alkitronic® EB: Battery-driven torque multiplier from 170 Nm to 6,000 Nm / 125 ft.lbs to 4,425 ft.lbs.
- Extremely mobile and always ready for use: Innovative product design for comfortable working - independent of external power supply.
- Permanent higher joint quality by continuous rotation of the square drive.

0 บาท

-50%

เครื่องเดโม่ - เครื่องบากขอบลบคม KOHLE Portable Chamfer Milling Machine K-HFM/KaKi 2014-1-8-E

PORTABLE CHAMFER MILLING MACHINE
K-HFM/KaKi 2014-1-8-E

45°, 30°, 60° chamfers

The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.

Application range
· Sheet metal, pipes, flanges, inside contours, bores, etc.
· Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plastics

ราคาปกติ: 63,500 บาท

Special Price 31,565 บาท

-53%

เครื่องเดโม่ - เครื่องหมุนถังหมุนท่ออัตโนมัติ ขนาด 5ตัน Self Aligned Welding Rotator

Self-aligned welding rotator including one power and one idle, after load on the work-piece, the roll will auto suit the workpiece, no need to adjust the center distance. The transmission mechanism: motor---multi-step speed adjust----roll, can adopt frequency speed adjust

ราคาปกติ: 106,500 บาท

Special Price 50,000 บาท

-20%

เครื่องเดโม่ - เครื่องบากเหล็กแผ่นและท่ออัตโนมัติ Cevisa CHP-12 + ล้อเข็น

Unique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP 12 the first model to be sold all over the world with years of international success.

The beveler CHP 12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutes

Benefits of plate and tube beveler CHP 12

High average cutters lifespan : about 1.000 m
High profitability: Extremely low cost/beveled meter/ minute
Zero maintenance.
Self-feed.
Easy-to-handle and easy to use.
Flexible.

ราคาปกติ: 245,000 บาท

Special Price 195,000 บาท

ประแจทอร์คขันเครื่องแลกเปลี่ยนความร้อน รุ่น R/SG

- Continuous rotation tightening or loosening of spindles or long threaded bolts. Ideal for bolting connections on plate heat exchangers.
- Torque range of the pneumatic driven types: alkitronic RCL two gear torque multiplier with radial gearing from 590 Nm to 4,840 Nm, alkitronic CLS-SG with tangential gearing from 1,280 Nm to 3,780 Nm.
- Torque range of the electric driven types: alkitronic EF-R / EFCip-R / EF-SG / EFCip-SG: from 560 Nm to 3,780 Nm.

0 บาท

ประแจทอร์คทดแรงแบบแมน่วล รุ่น Missing Link/ XCE Link

The alkitronic® Norwolf Missing Link™ - the most revolutionary manual torque multiplier for applications where standard tools don´t fit.

The alkitronic® Norwolf XCE Link™ is essentially a Missing Link™ with the ability to turn continuously.

0 บาท

ประแจทอร์คทดแรงแบบแมน่วล รุ่น M

- alkitronic M manual torque multiplier - for energy independent tightening and loosening of heavy-duty bolting connections.
- Torques from 200 Nm up to 50000 Nm.
- The ideal torque tool in high explosion-risk areas.
- alkitronic M provide safe, economic, problem-free operation. They replace impact wrenches, pipe extensions and other inadequate methods.

0 บาท

ปั๊มไฮดรอลิคแบบใช้ลม รุ่น LHP

- The hydraulic pump is robust and powered with a unique worldwide proven pneumatic drive.
- Perfect for use in explosion risk areas. Optional with ATEX-certification: II 2 GD c IIB T6.
- Simple operation and infinitely adjustable pressure setting, up to 700 bar.
- Ideal working conditions with an air pressure of 2-7 bar and a flow rate of approx. 10-15 l/sec.

0 บาท

ปั๊มไฮดรอลิค รุ่น LEVA

- The alkitronic LEVA is a robust, powerful, electric driven hydraulic pump.
- Small, low weight, reliable - ideal for service use.

- Simple operation, continuously adjustable up to 700 bar.

- Trouble-free operation on the 230 V main grids as well as on voltagecontrolled mobile generators.

0 บาท

ปั๊มไฮดรอลิค รุ่น VELOX

- Worldwide unique electrical hydraulic pump with protection class IP65. Protected against rain, splash water and dust deposit and therefore no costly downtime.
- Simple operation and infinitely adjustable pressure setting up to 700 bar.
- Suitable for 110V or 230V main grids and voltage controlled mobile power units.

0 บาท

ปั๊มไฮดรอลิค รุ่น NOVA

- Electric driven hydraulic pump, usable worldwide 100-253 V / 45-66 Hz, up to 700 bar / 10,000 psi for hydraulic wrenches with single or doubleacting cylinders
- Duo- or Quattro version (for 2 or 4 wrenches etc.) optional
- Robust compact design for use on the roughest construction sites

0 บาท

ประแจทอร์คไฮดรอลิค รุ่น AT

- Hydraulic torque wrenches with two hydraulic hose systems for tightening and loosening heavy bolt connections.
- alkitronic AT hydraulic torque wrenches from 110 up to 72.000 Nm for threads of M14 and larger.
- No checking needed: High repeatability ± 3% for the same bolting process.

0 บาท

ประแจทอร์คไฮดรอลิค รุ่น AX

- Hydraulic torque wrenches with two hydraulic hose system for tightening or loosening heavy bolt connections.
- alkitronic AX convertible type torque wrench up to 49,240 Nm. Drive element with interchangeable hexagon link from 17 to 145 mm.

0 บาท

ประแจทอร์คไฮดรอลิค รุ่น Norwolf

Hydraulic Wrench System

The alkitronic/Norwolf X DRIVER SYSTEM - the most revolutionary hydraulic torque wrench system ever created.

The profiles are totally flat with no extrusions that create hangups. The design, with a smaller cylinder bore but longer levers, creates less stress on all parts. Easier to get into confined areas and around nuts in hard to access spaces.

With the durability of solid steel design, fewer parts, and clean-lined construction.

0 บาท

pneumatic torque multiplier for comfortable operation at deep bolting connections

ประแจทอร์คทดแรงแบบลม รุ่น CLD-N

- alkitronic CLD-N quick pneumatic torque multiplier for comfortable operation at deep bolting connections due to extended square drive. Typical field of application: drop-center rims of heavy-duty vehicles.
- Torque range: 1,180 Nm to 3,500 Nm.
- Optional ATEX rated: Perfect for applications in hazardous environments prone to explosion.

0 บาท

ประแจทอร์คทดแรงแบบลม รุ่น CLV

- Pneumatic torque multipliers for torques up to 3,460 Nm.
- Multiple fastening connections and series assembly in semi-automatic operations.
- Perfect for bolted applications in hazardous, explosive environments.

0 บาท

ประแจทอร์คทดแรงแบบลม รุ่น CL

- alkitronic CLS: quick, compact torque multiplier for torques of 60 Nm to 3,500 Nm
- alkitronic CLD: comfortable torque multiplier with rotating handle for torques of 160 Nm to 9,800 Nm
- alkitronic CLS2: high-performance 2-gear machine for torques of 120 Nm to 48,000 Nm
- Continuous rotation, tightening, or loosening for all heavy duty fastening connections
- Perfect for bolted applications in hazardous, explosive environments

0 บาท