สินค้าทั้งหมด

Element 50 Low profile

AS THE LARGEST CAPACITY LOW PROFILE MAG DRILL ON THE MARKET, THE ELEMENT 50 LOW PROFILE COMBINES AN IMPRESSIVE 1200W MOTOR WITH A BODY OF JUST 179MM/100MM/329MM. THIS COMPACT POWERHOUSE CAN REACH ANY AREAS INACCESSIBLE TO A LARGER MODEL WITHOUT COMPROMISING ON PERFORMANCE. CUTTING TO A DEPTH AND DIAMETER OF 50MM, THE DRILL OFFERS A QUICK RELEASE INTERCHANGEABLE HANDLE FOR CONVENIENCE ALONGSIDE INTERNAL COOLING AND CABLING TO REDUCE DOWNTIME AND RISK OF DAMAGE. AS WELL AS THIS, IT IS CAPABLE OF COUNTERSINKING UP TO 30MM (REQUIRES AN EXTENSION ARBOR -RD32059)

ดูรายละเอียดเพิ่มเติม

TTHE COMMANDO 40 MAG DRILL

BOASTING A MORE POWERFUL 1100W MOTOR AND FLEXIBLE 6 SPEED SETTINGS, THE COMMANDO 40 BUILDS UPON ALL THE FUNDAMENTALS WHICH MAKE THE COMMANDO 35 SO VALUABLE, ADDING FURTHER CAPABILITIES AND FUNCTIONS TO AN ALREADY OUTSTANDING DRILL. WITH A DRILL DIAMETER OF UP TO 40MM AND A DEPTH OF CUT AT 50MM, THIS DRILL IS SUITED TO A WIDE RANGE OF PROJECTS, PARTICULARLY COUNTERSINKING AND USING TWIST DRILLS. CONSISTENT WITH THE ROTABROACH EMPHASIS ON SAFETY, THE COMMANDO 40 FEATURES A MECHANICAL CLUTCH, FIXED GUARD AND ELECTRONIC OVERLOAD TO ENSURE THE HIGHEST STANDARDS OF USER SAFETY.

ดูรายละเอียดเพิ่มเติม

THE ELEMENT 30 MAG DRILL

A LIGHTWEIGHT, RELIABLE SINGLE-SPEED DRILL, THE ELEMENT 30 MAG DRILL PERFECTLY BALANCES POWER AND PORTABILITY WITH EASE. ITS 31MM DIAMETER CUTTING CAPACITY AND 35MM DEPTH OF CUT ARE SUITED TO A WIDE RANGE OF PROJECTS WHILST ITS 850W MOTOR PACKS A RESPECTABLE LEVEL OF POWER INTO ITS LIGHT 12KG FRAME.

ดูรายละเอียดเพิ่มเติม

THE ELEMENT 40 MAG DRILL

DESIGNED WITH THE SAME INNOVATIVE APPROACH AS THE ELEMENT 30, THE ELEMENT 40 MAG DRILL TAKES THINGS ONE STEP FURTHER. A POWERFUL 1200W MOTOR, WITH A TWO-SPEED MECHANICAL GEARBOX, ALLOWS EVEN A RELATIVELY SMALL DRILL LIKE THE ELEMENT 40 MAG DRILL TO CUT QUICKLY AND EFFICIENTLY.

ดูรายละเอียดเพิ่มเติม

Drill depth 50 mm

MIRANDA Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 50 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 50 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

ดูรายละเอียดเพิ่มเติม

Drill depth 100 mm

SCHIFLER Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 35-100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 35-100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

ดูรายละเอียดเพิ่มเติม

Drill depth 100 mm

SCHIFLER Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 100 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 100 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

ดูรายละเอียดเพิ่มเติม

Drill depth 35 mm

ACT Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 35 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 35 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

ดูรายละเอียดเพิ่มเติม

Drill depth 30-50 mm

RUKO Tungsten Carbide Tipped (SANDVIK) Annular Cutters with a drill depth of 30-50 mm are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools 30-50 mm are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.

ดูรายละเอียดเพิ่มเติม