สินค้าทั้งหมด

The ID-Mounted beveling machine operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

Innovative technology and the pioneering imagination of EBS engineers make the HANDJET printer a true work titan. A print height of 8 mm (matrix 5 × 5) to 29 mm (matrix 16 × 10) makes it the most versatile portable printer ever made. You can take it everywhere with you.

The alkitronic® Norwolf Missing Link™ - the most revolutionary manual torque multiplier for applications where standard tools don´t fit.

The alkitronic® Norwolf XCE Link™ is essentially a Missing Link™ with the ability to turn continuously.

- The alkitronic LEVA is a robust, powerful, electric driven hydraulic pump.
- Small, low weight, reliable - ideal for service use.

- Simple operation, continuously adjustable up to 700 bar.

- Trouble-free operation on the 230 V main grids as well as on voltagecontrolled mobile generators.

- Hydraulic torque wrenches with two hydraulic hose systems for tightening and loosening heavy bolt connections.
- alkitronic AT hydraulic torque wrenches from 110 up to 72.000 Nm for threads of M14 and larger.
- No checking needed: High repeatability ± 3% for the same bolting process.

- alkitronic CLD-N quick pneumatic torque multiplier for comfortable operation at deep bolting connections due to extended square drive. Typical field of application: drop-center rims of heavy-duty vehicles.
- Torque range: 1,180 Nm to 3,500 Nm.
- Optional ATEX rated: Perfect for applications in hazardous environments prone to explosion.

- alkitronic® E, 2-speed torque multiplier for torques from 200 Nm to 10,000 Nm.
- The indestructible workaday torque tool is used to loosen or tighten heavy-duty bolted connections with high on-the-job safety and short assembly times.
- Permanently higher joint quality, compared to ratchet torque tools or tools with impact mechanism, by continuous rotation of the square drive.
- Efficient operation with short fastening cycles: Fast gear for run down and power gear for highest torques and precision.

-  alkitronic EFCip / ECWip Electric Torque Multipliers from 60 to 6,500 Nm.

-  Consistent Torque accuracy on all international power supplies (100-253 V / 45-66 Hz).

-  Precise shut-off with on-site voltage-controlled portable generators.

-  Models ECWip angled tools low height for restricted access applications.