คุณยังไม่มีสินค้าในรถเข็น
สินค้าทั้งหมด
เลือกซื้อโดย
กำลังเลือกซื้อโดย
-
แบรนด์: อีบีเอส
, โอมก้า, บิ๊บโก้, โนด้า
ตัวเลือกการซื้อ
- ประเภท
- แบรนด์
- ไฟน์ (40)
- อีบีเอส (2)
- ไบเออร์ (25)
- อัลกิโทรนิค (20)
- แบล็คไอรอน (0)
- โอมก้า (5)
- เซวิซ่า (3)
- บิ๊บโก้ (6)
- มารีนแทรเวลลิฟท์ (0)
- ชัตเติ้ลลิฟท์ (0)
- เบรนเนนสตูล (31)
- เมตาโบ (53)
- ยูโรบอร์ (99)
- ดัสค์คอนโทรล (6)
- โนด้า (3)
- โรตาบอช (4)
สินค้าทั้งหมด
-
BIBKO ADD-ON SAND AND GRAVEL SEPARATION
A robust and easy to install separator divides the recycled aggregates into sand and gravel.
0 บาท -
BIBKO ADD-ON EXTERNAL BUCKET ELEVATOR
A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.
0 บาท -
BIBKO ADD-ON DISCHARGE BUFFER AND PUMP DISCHARGE
The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.
The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.
The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.
0 บาท -
BIBKO FILTER PRESS SOLUTIONS
- Purification of residual/wash water with fine particles
- Purification of coloured water
- Simple handling of the filter cake
- Little space required, high filtration performance of the system
- Low operating and maintenance costs0 บาท -
BIBKO COMTEC RECYCLING SYSTEMS
- Recycling capacity of 4, 10, 20 and 30 m³/h
- Dosing buffer and a special extension allow for fast discharge into the machine
- Large capacity wash drum (0.5-3.5 m³) guarantees best performance
- Compact design. No foundation mobile option available.
- Light aluminium cover supported by gas pressure springs
- Heated option available
- Hot-dip galvanised for longevity0 บาท -
BIBKO RWS RECYCLING SYSTEMS
- Recycling capacity of 4, 8, 12 and 18 m³/h
- Compact design. No foundation mobile option available.
- Heated option available
- Hot-dip galvanised for longevity0 บาท -
เครื่องตัดและบากท่อ Stationary Pipe Cutting & Beveling Machine
Stataionary pipe cold beveling and cutting machine will provide high efficiency in-house pipe pre-fabricate job.
There are light-duty and heavy duty for options, also NODHA provides auxiliary equipments such as converying roller system to help users improve efficiency and reduce labor costs.
CNC pipe beveling machine SPB series, covering pipe diameter range of 2 “-48”, according to ASME B16.25 standard, processing various forms of beveling, to meet the needs of various welding seam: V type beveling, U type beveling, compound beveling and counter boring.
0 บาท -
เครื่องตัดและบากท่อ Split Frame Pipe Cold Cutting and Beveling Machine
The clamshell pipe cold cutter is ideal for all types of pipe cold cutting, beveling and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut/bevel, counterbore operations, as well as weld end preparation on open ended pipe, Ranging from 3/4” to 56 inches O.D.(DN20-1400), on most wall thicknesses and material.
0 บาท -
เครื่องบากท่อ ID-Mounted & OD-Mounted Pipe Beveling Machine
The ID-Mounted beveling machine operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.
0 บาท -
เครื่องพิมพ์อิงค์เจ็ทแบบพกพา HANDJET EBS-250
Innovative technology and the pioneering imagination of EBS engineers make the HANDJET printer a true work titan. A print height of 8 mm (matrix 5 × 5) to 29 mm (matrix 16 × 10) makes it the most versatile portable printer ever made. You can take it everywhere with you.
0 บาท -
เครื่องพิมพ์อิงค์เจ็ทแบบพกพา HANDJET EBS-260
A state-of-the-art portable inkjet printer which takes product marking and coding to another level.
It is light, handy and wireless. The printer is fully portable and versatile – you can print customized messages in almost every language on many different types of surfaces.
It will print text, graphics, 1D and 2D barcodes.
0 บาท -
เครื่องบากขอบลบคมแผ่นเหล็ก ท่อเหล็ก OMCA รุ่น Art.760/3
BEVEL LENGTH (L): max 22 mm
BEVEL ANGLE: 15° - 60° (*)0°-60°
0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 930 Reverse
Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.
Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZBevel Length
max 59 mmBevel Angle
0° – 60°Plate Thickness
8 – 60 mm (*) 8 – 100 mmFeeding Speed
0 -1.4 mt/min0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Big Plus
Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW. The four feeding wheels and machine design make this one of the most rigid machines on the market.
Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZBevel Length
max 77 mmBevel Angle
15° – 80° (*) 0°-80°Plate Thickness
8 – 100mm (*) 8- 200 mmFeeding Speed
0 -1.4 mt/min0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Plus
Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm.
Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 HzBevel Length
max 55 mmBevel Angle
15° – 80°Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mmFeeding Speed
0 -1.4 mt/min0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900
Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute. The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels.
Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 HzBevel Length
max 55 mmBevel Angle
15° – 60°Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mmPipe
Ø min 3000 mmFeeding Speed
0 -1.4 mt/min0 บาท
