สินค้าทั้งหมด

BIBKO ADD-ON SAND AND GRAVEL SEPARATION

A robust and easy to install separator divides the recycled aggregates into sand and gravel.

0 บาท

BIBKO ADD-ON EXTERNAL BUCKET ELEVATOR

A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level. The external buckets are mounted on an extension of the main shaft of the machine.

0 บาท

BIBKO ADD-ON DISCHARGE BUFFER AND PUMP DISCHARGE

The advantage of a dosing buffer derives from the possibility to discharge several trucks at higher speed.

The dosing buffer collects the residual material and continuously feeds it into the connected recycling machine.

The produced washing quality as well as the separation cut of the fines contained in the greywater is assured as they are independent of the evacuation speed of the trucks. Due to the higher discharge speed of the trucks the total time for the discharge and wash process of the trucks is significantly reduced.

0 บาท

BIBKO FILTER PRESS SOLUTIONS

- Purification of residual/wash water with fine particles
- Purification of coloured water
- Simple handling of the filter cake
- Little space required, high filtration performance of the system
- Low operating and maintenance costs

0 บาท

BIBKO COMTEC RECYCLING SYSTEMS

- Recycling capacity of 4, 10, 20 and 30 m³/h
- Dosing buffer and a special extension allow for fast discharge into the machine
- Large capacity wash drum (0.5-3.5 m³) guarantees best performance
- Compact design. No foundation mobile option available.
- Light aluminium cover supported by gas pressure springs
- Heated option available
- Hot-dip galvanised for longevity

0 บาท

BIBKO RWS RECYCLING SYSTEMS

- Recycling capacity of 4, 8, 12 and 18 m³/h
- Compact design. No foundation mobile option available.
- Heated option available
- Hot-dip galvanised for longevity

0 บาท

-50%

เครื่องเดโม่ - เครื่องบากขอบลบคม KOHLE Portable Chamfer Milling Machine K-HFM/KaKi 2014-1-8-E

PORTABLE CHAMFER MILLING MACHINE
K-HFM/KaKi 2014-1-8-E

45°, 30°, 60° chamfers

The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.

Application range
· Sheet metal, pipes, flanges, inside contours, bores, etc.
· Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plastics

ราคาปกติ: 63,500 บาท

Special Price 31,565 บาท

-53%

เครื่องเดโม่ - เครื่องหมุนถังหมุนท่ออัตโนมัติ ขนาด 5ตัน Self Aligned Welding Rotator

Self-aligned welding rotator including one power and one idle, after load on the work-piece, the roll will auto suit the workpiece, no need to adjust the center distance. The transmission mechanism: motor---multi-step speed adjust----roll, can adopt frequency speed adjust

ราคาปกติ: 106,500 บาท

Special Price 50,000 บาท

-20%

เครื่องเดโม่ - เครื่องบากเหล็กแผ่นและท่ออัตโนมัติ Cevisa CHP-12 + ล้อเข็น

Unique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP 12 the first model to be sold all over the world with years of international success.

The beveler CHP 12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutes

Benefits of plate and tube beveler CHP 12

High average cutters lifespan : about 1.000 m
High profitability: Extremely low cost/beveled meter/ minute
Zero maintenance.
Self-feed.
Easy-to-handle and easy to use.
Flexible.

ราคาปกติ: 245,000 บาท

Special Price 195,000 บาท

เครื่องดูดฝุ่นดัสค์คอนโทรล รุ่น DC Storm 500 c/L/a

เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Storm 500 c/L/a

Three-phase machines

Our three-phase dust extractors are used for heavy materials where high pressure is required. The vacuum producer is a turbo pump, directly driven by a three-phase motor. Our dependable turbo machines have minimal service requirements and a long life. The characteristic performance of the turbo pump is well suited for heavy cleaning and material transport. The turbo motor generates more vacuum when the resistance increases.

Get rid of large quantites of dust

The DC Storm 500 has a three-phase direct driven turbo pump that is suitable for continuous operation and heavy material transport, source extraction and cleaning. Several improvements have incorporated in it:

a new efficient semi-automatic filter cleaning system
for easier transportation it has handles both front and rear and the cyclone can be tilted
for better ergonomic the handles are adjustable and the cyclone can be tilted for easier filter exchange
equipped with Intellibag (DC Storm 500c), container (DC Storm 500a) or Longopac (DC Storm 500L
a new more efficient HEPA filter with a larger filter area

0 บาท

เครื่องดูดฝุ่นดัสค์คอนโทรล รุ่น DC Tromb 400 Twin AL

เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 Twin c/L/a

DC Tromb 400 Twin c/L/a

With Twin Power against Dust

- Integrated preseparator
- Dust extractor and preseparator are separable
- Long lifetime and robust construction
- High effective cyclone with patented fine filter and HEPA H13 filter for a safe asbestos* removal
- Dust free removal of the plastic sack (intellibag®)
- Accessories for many different tasks
- Holder for accessories and plastic sacks

* In accordance with EN 60335-2-69 class H and EN 1822-1 HEPA H13

0 บาท

เครื่องดูดฝุ่นดัสค์คอนโทรล รุ่น DC Tromb 400 a

เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 c/L/a

Dust Control DC Tromb 400 c/L/a, Single Phase, 3000watt, Flow max 420 m3/h

- Tackles up to 420 m3/h
- Handles all kinds of fine dusts and materials created on construction sites as well as dust from many other industrial factory processes
- Equipped with a patented self-cleaning filter (washable polyester) and a H13-filter
- Compact and robust - easy to move and transport
- Signal lamp showing when it's time to clean the filter
- Puncture proof wheels of ”non marking-type”, loackable to enable the user to work on uneven ground

0 บาท

เครื่องดูดฝุ่นดัสค์คอนโทรล รุ่น DC 2900 a

เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 2900 c/L/a

Dust Control DC 2900 c/L/a Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h

0 บาท

เครื่องดูดฝุ่นดัสค์คอนโทรล รุ่น DC 1800 XL with Auto Start

เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 XL with Auto Start

Dust Control DC1800 XL Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 60L Container

- Especially suited for parquet grinding and other working operations that produce light dust
- Suitable for general cleaning and source extraction from handheld power tools (with up to 5” suction casings) and small table saws.
- Slim, lightweight and ideal for those that need a highly portable machine that is powerful enough for source extraction.
- Equipped with a steel container

0 บาท

เครื่องดูดฝุ่นดัสค์คอนโทรล รุ่น DC 1800 H

เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 H with Auto Start

Dust Control DC1800 H Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 20L Container

0 บาท