สินค้าทั้งหมด

TTHE COMMANDO 40 MAG DRILL

BOASTING A MORE POWERFUL 1100W MOTOR AND FLEXIBLE 6 SPEED SETTINGS, THE COMMANDO 40 BUILDS UPON ALL THE FUNDAMENTALS WHICH MAKE THE COMMANDO 35 SO VALUABLE, ADDING FURTHER CAPABILITIES AND FUNCTIONS TO AN ALREADY OUTSTANDING DRILL. WITH A DRILL DIAMETER OF UP TO 40MM AND A DEPTH OF CUT AT 50MM, THIS DRILL IS SUITED TO A WIDE RANGE OF PROJECTS, PARTICULARLY COUNTERSINKING AND USING TWIST DRILLS. CONSISTENT WITH THE ROTABROACH EMPHASIS ON SAFETY, THE COMMANDO 40 FEATURES A MECHANICAL CLUTCH, FIXED GUARD AND ELECTRONIC OVERLOAD TO ENSURE THE HIGHEST STANDARDS OF USER SAFETY.

-  alkitronic EA: Battery driven 2-speed torque multiplier for torques from 300 Nm to 2,800 Nm 

-  Short fastening cycles: fast gear for run down and power gear for highest torques and precision.

-  Mobile and always ready for use: compact design for convenient working in limited spaces or without power supply.

PORTABLE CHAMFER MILLING MACHINE
K-HFM/KaKi 2014-1-8-E

45°, 30°, 60° chamfers

The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.

Application range
· Sheet metal, pipes, flanges, inside contours, bores, etc.
· Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plastics

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min

- alkitronic M manual torque multiplier - for energy independent tightening and loosening of heavy-duty bolting connections.
- Torques from 200 Nm up to 50000 Nm.
- The ideal torque tool in high explosion-risk areas.
- alkitronic M provide safe, economic, problem-free operation. They replace impact wrenches, pipe extensions and other inadequate methods.

- Worldwide unique electrical hydraulic pump with protection class IP65. Protected against rain, splash water and dust deposit and therefore no costly downtime. 
- Simple operation and infinitely adjustable pressure setting up to 700 bar.
- Suitable for 110V or 230V main grids and voltage controlled mobile power units. 

- Hydraulic torque wrenches with two hydraulic hose system for tightening or loosening heavy bolt connections.
- alkitronic AX convertible type torque wrench up to 49,240 Nm. Drive element with interchangeable hexagon link from 17 to 145 mm.