สินค้าทั้งหมด

Battery driven 2-speed torque multiplier

ประแจทอร์คทดแรงแบบไร้สาย รุ่น EA

- alkitronic EA: Battery driven 2-speed torque multiplier for torques from 90 Nm to 4,000 Nm (65 to 2,950 lbf ft).

- Short fastening cycles: fast gear for run down and power gear for highest torques and precision.

- Mobile and always ready for use: compact design for convenient working in limited spaces or without power supply.

- Efficient operation: Fast and easy gear-changing, great torque range – you can choose from 22 torque values.

0 บาท

alkitronic EFCip / ECWip Electric Torque Multipliers

ประแจทอร์คทดแรงแบบไฟฟ้า รุ่น EFCip

- alkitronic EFCip / ECWip Electric Torque Multipliers from 60 to 6,500 Nm.

- Consistent Torque accuracy on all international power supplies (100-253 V / 45-66 Hz).

- Precise shut-off with on-site voltage-controlled portable generators.

- Models ECWip angled tools low height for restricted access applications.

0 บาท

alkitronic EF/EFW electrical torque multipliers

ประแจทอร์คทดแรงแบบไฟฟ้า รุ่น EF

- alkitronic EF-S/EF-A electrical torque multipliersfor torques of 430 to 42,000 Nm (315 to 30,980 ft.lbs).
- Consistent torque accuracy on all international power supplies
- Precise shut-off torque also operates with voltage-controlled portable generators.
- Models alkitronic EF-A in angled design with high operating comfort in confined spaces for torques of 430 to 9.800 Nm (315 to 7,230 ft.lbs).

0 บาท

EFCip-N electric multipliers for comfortable operation at deep bolting connections

ประแจทอร์คทดแรงไฟฟ้าแบบคอยาว รุ่น EFCip-N

- alkitronic EFCip-N electric multipliers for comfortable operation at deep bolting connections due to extended nose.

- torque range: 510 Nm to 3,000 Nm.

- Consistent torque accuracy using all international power supplies 100-253 V / 45-66 Hz even when operating with portable generators.
- Smart processor-controlled shut-off electronic for precise reproduction of the preselected torque (repeatability ± 3% for the same bolting application).

0 บาท

alkitronic® E, 2-speed torque multiplier

ประแจทอร์คทดแรงแบบไฟฟ้า รุ่น E

- alkitronic® E, 2-speed torque multiplier for torques from 200 Nm to 10,000 Nm.
- The indestructible workaday torque tool is used to loosen or tighten heavy-duty bolted connections with high on-the-job safety and short assembly times.
- Permanently higher joint quality, compared to ratchet torque tools or tools with impact mechanism, by continuous rotation of the square drive.
- Efficient operation with short fastening cycles: Fast gear for run down and power gear for highest torques and precision.

0 บาท

ประแจทอร์คทดแรงแบบลม รุ่น CL

- alkitronic CLS: quick, compact torque multiplier for torques of 60 Nm to 3,500 Nm
- alkitronic CLD: comfortable torque multiplier with rotating handle for torques of 160 Nm to 9,800 Nm
- alkitronic CLS2: high-performance 2-gear machine for torques of 120 Nm to 48,000 Nm
- Continuous rotation, tightening, or loosening for all heavy duty fastening connections
- Perfect for bolted applications in hazardous, explosive environments

0 บาท

ประแจทอร์คทดแรงแบบลม รุ่น CLV

- Pneumatic torque multipliers for torques up to 3,460 Nm.
- Multiple fastening connections and series assembly in semi-automatic operations.
- Perfect for bolted applications in hazardous, explosive environments.

0 บาท

pneumatic torque multiplier for comfortable operation at deep bolting connections

ประแจทอร์คทดแรงแบบลม รุ่น CLD-N

- alkitronic CLD-N quick pneumatic torque multiplier for comfortable operation at deep bolting connections due to extended square drive. Typical field of application: drop-center rims of heavy-duty vehicles.
- Torque range: 1,180 Nm to 3,500 Nm.
- Optional ATEX rated: Perfect for applications in hazardous environments prone to explosion.

0 บาท

ประแจทอร์คไฮดรอลิค รุ่น Norwolf

Hydraulic Wrench System

The alkitronic/Norwolf X DRIVER SYSTEM - the most revolutionary hydraulic torque wrench system ever created.

The profiles are totally flat with no extrusions that create hangups. The design, with a smaller cylinder bore but longer levers, creates less stress on all parts. Easier to get into confined areas and around nuts in hard to access spaces.

With the durability of solid steel design, fewer parts, and clean-lined construction.

0 บาท

ประแจทอร์คไฮดรอลิค รุ่น AX

- Hydraulic torque wrenches with two hydraulic hose system for tightening or loosening heavy bolt connections.
- alkitronic AX convertible type torque wrench up to 49,240 Nm. Drive element with interchangeable hexagon link from 17 to 145 mm.

0 บาท

ประแจทอร์คไฮดรอลิค รุ่น AT

- Hydraulic torque wrenches with two hydraulic hose systems for tightening and loosening heavy bolt connections.
- alkitronic AT hydraulic torque wrenches from 110 up to 72.000 Nm for threads of M14 and larger.
- No checking needed: High repeatability ± 3% for the same bolting process.

0 บาท

ปั๊มไฮดรอลิค รุ่น NOVA

- Electric driven hydraulic pump, usable worldwide 100-253 V / 45-66 Hz, up to 700 bar / 10,000 psi for hydraulic wrenches with single or doubleacting cylinders
- Duo- or Quattro version (for 2 or 4 wrenches etc.) optional
- Robust compact design for use on the roughest construction sites

0 บาท

ปั๊มไฮดรอลิค รุ่น VELOX

- Worldwide unique electrical hydraulic pump with protection class IP65. Protected against rain, splash water and dust deposit and therefore no costly downtime.
- Simple operation and infinitely adjustable pressure setting up to 700 bar.
- Suitable for 110V or 230V main grids and voltage controlled mobile power units.

0 บาท

ปั๊มไฮดรอลิค รุ่น LEVA

- The alkitronic LEVA is a robust, powerful, electric driven hydraulic pump.
- Small, low weight, reliable - ideal for service use.

- Simple operation, continuously adjustable up to 700 bar.

- Trouble-free operation on the 230 V main grids as well as on voltagecontrolled mobile generators.

0 บาท

ปั๊มไฮดรอลิคแบบใช้ลม รุ่น LHP

- The hydraulic pump is robust and powered with a unique worldwide proven pneumatic drive.
- Perfect for use in explosion risk areas. Optional with ATEX-certification: II 2 GD c IIB T6.
- Simple operation and infinitely adjustable pressure setting, up to 700 bar.
- Ideal working conditions with an air pressure of 2-7 bar and a flow rate of approx. 10-15 l/sec.

0 บาท

ประแจทอร์คทดแรงแบบแมน่วล รุ่น M

- alkitronic M manual torque multiplier - for energy independent tightening and loosening of heavy-duty bolting connections.
- Torques from 200 Nm up to 50000 Nm.
- The ideal torque tool in high explosion-risk areas.
- alkitronic M provide safe, economic, problem-free operation. They replace impact wrenches, pipe extensions and other inadequate methods.

0 บาท

ประแจทอร์คทดแรงแบบแมน่วล รุ่น Missing Link/ XCE Link

The alkitronic® Norwolf Missing Link™ - the most revolutionary manual torque multiplier for applications where standard tools don´t fit.

The alkitronic® Norwolf XCE Link™ is essentially a Missing Link™ with the ability to turn continuously.

0 บาท

ประแจทอร์คขันเครื่องแลกเปลี่ยนความร้อน รุ่น R/SG

- Continuous rotation tightening or loosening of spindles or long threaded bolts. Ideal for bolting connections on plate heat exchangers.
- Torque range of the pneumatic driven types: alkitronic RCL two gear torque multiplier with radial gearing from 590 Nm to 4,840 Nm, alkitronic CLS-SG with tangential gearing from 1,280 Nm to 3,780 Nm.
- Torque range of the electric driven types: alkitronic EF-R / EFCip-R / EF-SG / EFCip-SG: from 560 Nm to 3,780 Nm.

0 บาท

เครื่องพิมพ์อิงค์เจ็ทแบบพกพา HANDJET EBS-260

A state-of-the-art portable inkjet printer which takes product marking and coding to another level.

It is light, handy and wireless. The printer is fully portable and versatile – you can print customized messages in almost every language on many different types of surfaces.

It will print text, graphics, 1D and 2D barcodes.

0 บาท

เครื่องพิมพ์อิงค์เจ็ทแบบพกพา HANDJET EBS-250

Innovative technology and the pioneering imagination of EBS engineers make the HANDJET printer a true work titan. A print height of 8 mm (matrix 5 × 5) to 29 mm (matrix 16 × 10) makes it the most versatile portable printer ever made. You can take it everywhere with you.

0 บาท

ประแจทอร์คทดแรงแบบไร้สาย รุ่น EB

- alkitronic® EB: Battery-driven torque multiplier from 170 Nm to 6,000 Nm / 125 ft.lbs to 4,425 ft.lbs.
- Extremely mobile and always ready for use: Innovative product design for comfortable working - independent of external power supply.
- Permanent higher joint quality by continuous rotation of the square drive.

0 บาท

-35%

เครื่องเดโม่ - ประแจทอร์คทดแรงแบบไร้สาย รุ่น EA 2/280 (Torque 300-2800Nm)

- alkitronic EA: Battery driven 2-speed torque multiplier for torques from 300 Nm to 2,800 Nm

- Short fastening cycles: fast gear for run down and power gear for highest torques and precision.

- Mobile and always ready for use: compact design for convenient working in limited spaces or without power supply.

- Efficient operation: Fast and easy gear-changing, great torque range – you can choose from 22 torque values.

ราคาปกติ: 303,345 บาท

Special Price 197,175 บาท

-20%

สว่านแท่นแม่เหล็กไฟฟ้า รุ่น Element E40 230V

THE ELEMENT 40 MAG DRILL

DESIGNED WITH THE SAME INNOVATIVE APPROACH AS THE ELEMENT 30, THE ELEMENT 40 MAG DRILL TAKES THINGS ONE STEP FURTHER. A POWERFUL 1200W MOTOR, WITH A TWO-SPEED MECHANICAL GEARBOX, ALLOWS EVEN A RELATIVELY SMALL DRILL LIKE THE ELEMENT 40 MAG DRILL TO CUT QUICKLY AND EFFICIENTLY.

ราคาปกติ: 29,425 บาท

Special Price 23,540 บาท

-20%

สว่านแท่นแม่เหล็กไฟฟ้า รุ่น Element E30 230V

THE ELEMENT 30 MAG DRILL

A LIGHTWEIGHT, RELIABLE SINGLE-SPEED DRILL, THE ELEMENT 30 MAG DRILL PERFECTLY BALANCES POWER AND PORTABILITY WITH EASE. ITS 31MM DIAMETER CUTTING CAPACITY AND 35MM DEPTH OF CUT ARE SUITED TO A WIDE RANGE OF PROJECTS WHILST ITS 850W MOTOR PACKS A RESPECTABLE LEVEL OF POWER INTO ITS LIGHT 12KG FRAME.

ราคาปกติ: 26,750 บาท

Special Price 21,400 บาท