สินค้าทั้งหมด

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

Pneumatic magnetic drilling machine Ø 12 – 55 mm / 16.5 kg

The portable Euroboor AIR.55 pneumatic drilling machine is equipped with an air-powered, spark-free motor and a non-electric, permanent magnet base. Connected to a compressor, it can be used for drilling on flat workpieces where electrical machines are less convenient or not allowed, especially in areas and spaces with potentially explosive atmospheres, such as offshore and petrochemical industries, as well as mining.

Magnetic drilling machine Ø 12 - 30 mm / 10.3 kg

The Euroboor TUBE.30 magnetic core drilling machine is suitable for both flat and pipe material. The TUBE.30 with patented shallow-field magnetic technology offers incredibly strong grip, even on steel as thin as 3 mm. This magnetic core drilling machine automatically pivots to conform to any pipe of ø 76.2 mm or larger. The magnet does not require electricity, so all the power goes to the motor. This offers increased safety as the drilling machine will not release from the target material in the event of an unintentional power loss.

Magnetic drilling machine Ø 12 - 60 mm / 12.9 kg

The Euroboor ECO.60S+ magnetic core drilling machine has a powerful 1,600 W motor, an oil lubricated gearbox and overheat protection. This portable magnetic core drilling machine benefits from innovative electronics which offer more safety, significantly reduce the risk of damage of the machine, tool and workpiece and protects the user in case of excessive vibrations or sudden displacement. The lifespan is considerably longer and you avoid high maintenance costs. This light and reliable machine is a true addition for every workplace.

Magnetic drilling machine Ø 12 - 50 mm / 12 kg

The Euroboor ECO.50S magnetic core drilling machine converts maximum power through its two speed oil lubricated gearbox. This improves motor efficiency and lifetime of key components. This portable industrial magnetic core drilling machine has an integrated slide which ensures stable support, faster drilling times and more accurate hole sizing.

Vacuum drilling machine Ø 12 – 50 mm / 9.9 kg

Innovation is here!

With the new Euroboor VAC.50s+ drilling machine the possibilities are endless. This revolutionary machine for annular cutting and drilling is especially made for horizontal application on non-magnetic surfaces. It actually sticks to almost all smooth surfaces (such as aluminium, stainless steel, plastics, composites, brass, bronze, zinc, lead or even copper) by using unique vacuum technology.

Push your limits and see what the new VAC.50s+ can do for you. The powerful motor with oil-lubricated gearbox ensures that you can drill energy-efficiently, more smoothly and faster with a maximum drill diameter of 50 mm. With our matching Cutting Paste IBP.70 the performance is even better, which saves you time and money.

Mini Air Bevelling Machine

Compact and lightweight machine on airpower.

The BM45AIR is the smallest bevelling machine in our range. Although it fits in the palm of your hand, don’t underestimate it’s power! The BM45AIR is designed for deburring and rounding edges on steel, stainless steel, aluminum and other materials. Perfectly suitable for machining holes from the internal diameter of 8 mm.

• Compact and great ergonomic design;
• Lightweight machine;
• Including 2x 45° and 2x R1.5 cutting plates;
• Safety lever trigger to prevent accidental starts;
• Bevel depth indicator for precise adjustment of the bevel size;
• 6-speed air speed regulator.