สินค้าทั้งหมด

เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute. The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels.

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min

0 บาท

เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Plus

Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm.

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 80°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm

Feeding Speed
0 -1.4 mt/min

0 บาท

เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Big Plus

Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW. The four feeding wheels and machine design make this one of the most rigid machines on the market.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 77 mm

Bevel Angle
15° – 80° (*) 0°-80°

Plate Thickness
8 – 100mm (*) 8- 200 mm

Feeding Speed
0 -1.4 mt/min

0 บาท

เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 930 Reverse

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

0 บาท

เครื่องดูดฝุ่นดัสค์คอนโทรล รุ่น DC 1800 H

เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 H with Auto Start

Dust Control DC1800 H Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 20L Container

0 บาท

เครื่องดูดฝุ่นดัสค์คอนโทรล รุ่น DC 1800 XL with Auto Start

เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 XL with Auto Start

Dust Control DC1800 XL Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 60L Container

- Especially suited for parquet grinding and other working operations that produce light dust
- Suitable for general cleaning and source extraction from handheld power tools (with up to 5” suction casings) and small table saws.
- Slim, lightweight and ideal for those that need a highly portable machine that is powerful enough for source extraction.
- Equipped with a steel container

0 บาท

เครื่องดูดฝุ่นดัสค์คอนโทรล รุ่น DC 2900 a

เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 2900 c/L/a

Dust Control DC 2900 c/L/a Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h

0 บาท

เครื่องดูดฝุ่นดัสค์คอนโทรล รุ่น DC Tromb 400 a

เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 c/L/a

Dust Control DC Tromb 400 c/L/a, Single Phase, 3000watt, Flow max 420 m3/h

- Tackles up to 420 m3/h
- Handles all kinds of fine dusts and materials created on construction sites as well as dust from many other industrial factory processes
- Equipped with a patented self-cleaning filter (washable polyester) and a H13-filter
- Compact and robust - easy to move and transport
- Signal lamp showing when it's time to clean the filter
- Puncture proof wheels of ”non marking-type”, loackable to enable the user to work on uneven ground

0 บาท

เครื่องดูดฝุ่นดัสค์คอนโทรล รุ่น DC Tromb 400 Twin AL

เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 Twin c/L/a

DC Tromb 400 Twin c/L/a

With Twin Power against Dust

- Integrated preseparator
- Dust extractor and preseparator are separable
- Long lifetime and robust construction
- High effective cyclone with patented fine filter and HEPA H13 filter for a safe asbestos* removal
- Dust free removal of the plastic sack (intellibag®)
- Accessories for many different tasks
- Holder for accessories and plastic sacks

* In accordance with EN 60335-2-69 class H and EN 1822-1 HEPA H13

0 บาท

เครื่องดูดฝุ่นดัสค์คอนโทรล รุ่น DC Storm 500 c/L/a

เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Storm 500 c/L/a

Three-phase machines

Our three-phase dust extractors are used for heavy materials where high pressure is required. The vacuum producer is a turbo pump, directly driven by a three-phase motor. Our dependable turbo machines have minimal service requirements and a long life. The characteristic performance of the turbo pump is well suited for heavy cleaning and material transport. The turbo motor generates more vacuum when the resistance increases.

Get rid of large quantites of dust

The DC Storm 500 has a three-phase direct driven turbo pump that is suitable for continuous operation and heavy material transport, source extraction and cleaning. Several improvements have incorporated in it:

a new efficient semi-automatic filter cleaning system
for easier transportation it has handles both front and rear and the cyclone can be tilted
for better ergonomic the handles are adjustable and the cyclone can be tilted for easier filter exchange
equipped with Intellibag (DC Storm 500c), container (DC Storm 500a) or Longopac (DC Storm 500L
a new more efficient HEPA filter with a larger filter area

0 บาท

เครื่องบากขอบลบคมแผ่นเหล็ก ท่อเหล็ก OMCA รุ่น Art.760/3

BEVEL LENGTH (L): max 22 mm

BEVEL ANGLE: 15° - 60° (*)0°-60°

0 บาท

เครื่องบากท่อ ID-Mounted & OD-Mounted Pipe Beveling Machine

The ID-Mounted beveling machine operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

0 บาท

เครื่องตัดและบากท่อ Split Frame Pipe Cold Cutting and Beveling Machine

The clamshell pipe cold cutter is ideal for all types of pipe cold cutting, beveling and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut/bevel, counterbore operations, as well as weld end preparation on open ended pipe, Ranging from 3/4” to 56 inches O.D.(DN20-1400), on most wall thicknesses and material.

0 บาท

NODHA CNC pipe cold cutting and beveling machine

เครื่องตัดและบากท่อ Stationary Pipe Cutting & Beveling Machine

Stataionary pipe cold beveling and cutting machine will provide high efficiency in-house pipe pre-fabricate job.

There are light-duty and heavy duty for options, also NODHA provides auxiliary equipments such as converying roller system to help users improve efficiency and reduce labor costs.

CNC pipe beveling machine SPB series, covering pipe diameter range of 2 “-48”, according to ASME B16.25 standard, processing various forms of beveling, to meet the needs of various welding seam: V type beveling, U type beveling, compound beveling and counter boring.

0 บาท

-20%