คุณยังไม่มีสินค้าในรถเข็น
สินค้าทั้งหมด
-
บล็อกกระแทกไร้สาย metabo SSW 18 LTX 300 BL (เครื่องเปล่าพร้อมกล่อง)
- Speed/torque levels: 12- Battery voltage: 18 V- Maximum torque: 300 Nm / 220 ft. lbs- Bit retainer: Male square 1/2" (12.70 mm)ราคาปกติ: 9,630 บาท
Special Price 7,704 บาท
-
บล็อกกระแทกไร้สาย metabo SSW 18 LTX 400 BL (เครื่องเปล่าพร้อมกล่อง metaBOX)
- Speed/torque levels: 12
- Battery voltage: 18 V- Maximum torque: 400 Nm / 295 ft. lbs- Bit retainer: Male square 1/2" (12.70 mm)13,250 บาท -
สว่านต๊าปเกลียวอัตโนมัติแบบไร้สาย 18V metabo GB 18 LTX BL Q I (เครื่องเปล่าพร้อมกล่อง)
- Battery voltage: 18 V
- Maximum torque - soft: 65 Nm / 575 in-lbs
- Maximum torque, hard: 130 Nm / 1151 ft. lbs- Max. thread diameter: M 12 (1/2" UNC/UNF)15,515 บาท -
สว่านไขควงกระแทกไร้สาย 18V metabo SB 18 LTX BL Q I (เครื่องเปล่าพร้อมกล่อง)
- Battery voltage: 18 V
- Maximum torque - soft: 65 Nm / 575 ft. lbs
- Maximum torque, hard: 130 Nm / 1151 ft. lbs
- Drill-Ø masonry: 16 mm / 5/8 "- Drill Ø steel: 13 mm / 1/2 "
- Drill-Ø soft wood: 68 mm / 2.68 "- No-load speed: 0 - 550 / 0 - 2000 rpmราคาปกติ: 12,840 บาท
Special Price 10,272 บาท
-
เครื่องเดโม่ - เครื่องบากขอบลบคม KOHLE Portable Chamfer Milling Machine K-HFM/KaKi 2014-1-8-E
PORTABLE CHAMFER MILLING MACHINE
K-HFM/KaKi 2014-1-8-E45°, 30°, 60° chamfers
The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.
Application range
· Sheet metal, pipes, flanges, inside contours, bores, etc.
· Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plasticsราคาปกติ: 63,500 บาท
Special Price 31,565 บาท
-
เครื่องเดโม่ - เครื่องหมุนถังหมุนท่ออัตโนมัติ ขนาด 5ตัน Self Aligned Welding Rotator
Self-aligned welding rotator including one power and one idle, after load on the work-piece, the roll will auto suit the workpiece, no need to adjust the center distance. The transmission mechanism: motor---multi-step speed adjust----roll, can adopt frequency speed adjust
ราคาปกติ: 106,500 บาท
Special Price 50,000 บาท
-
เครื่องเดโม่ - เครื่องบากเหล็กแผ่นและท่ออัตโนมัติ Cevisa CHP-12 + ล้อเข็น
Unique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP 12 the first model to be sold all over the world with years of international success.
The beveler CHP 12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutesBenefits of plate and tube beveler CHP 12
- High average cutters lifespan : about 1.000 m
- High profitability: Extremely low cost/beveled meter/ minute
- Zero maintenance.
- Self-feed.
- Easy-to-handle and easy to use.
- Flexible.
ราคาปกติ: 245,000 บาท
Special Price 195,000 บาท
-
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Storm 500 c/L/a
Three-phase machines
Our three-phase dust extractors are used for heavy materials where high pressure is required. The vacuum producer is a turbo pump, directly driven by a three-phase motor. Our dependable turbo machines have minimal service requirements and a long life. The characteristic performance of the turbo pump is well suited for heavy cleaning and material transport. The turbo motor generates more vacuum when the resistance increases.
Get rid of large quantites of dust
The DC Storm 500 has a three-phase direct driven turbo pump that is suitable for continuous operation and heavy material transport, source extraction and cleaning. Several improvements have incorporated in it:
- a new efficient semi-automatic filter cleaning system
- for easier transportation it has handles both front and rear and the cyclone can be tilted
- for better ergonomic the handles are adjustable and the cyclone can be tilted for easier filter exchange
- equipped with Intellibag (DC Storm 500c), container (DC Storm 500a) or Longopac (DC Storm 500L
- a new more efficient HEPA filter with a larger filter area
0 บาท -
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 Twin c/L/a
DC Tromb 400 Twin c/L/a
With Twin Power against Dust
- Integrated preseparator
- Dust extractor and preseparator are separable
- Long lifetime and robust construction
- High effective cyclone with patented fine filter and HEPA H13 filter for a safe asbestos* removal
- Dust free removal of the plastic sack (intellibag®)
- Accessories for many different tasks
- Holder for accessories and plastic sacks* In accordance with EN 60335-2-69 class H and EN 1822-1 HEPA H13
0 บาท -
เครื่องเดโม่ - สว่านแท่นแม่เหล็กไฟฟ้าไฟน์ รุ่น KBE 35 (#4)
S/N: 2016-09.400081
เจาะดอกเจ็ทบอสรูโตสุดได้ 35 ม.ม. ลึก 50 ม.ม., เจาะดอกเกลียวรูโตสุด 13 ม.ม., หัวจับดอกแบบ Weldon
Eco magnetic core drill for up to 35 mm. - Small and powerful single-speed Eco magnetic core drill with basic functionality for core drilling and twist drilling on the construction site.
ราคาปกติ: 42,131 บาท
Special Price 9,900 บาท
-
เครื่องเดโม่ - สว่านแท่นแม่เหล็กไฟฟ้าไฟน์ รุ่น KBE 35 (#3)
S/N: 2016-09.400079
เจาะดอกเจ็ทบอสรูโตสุดได้ 35 ม.ม. ลึก 50 ม.ม., เจาะดอกเกลียวรูโตสุด 13 ม.ม., หัวจับดอกแบบ Weldon
Eco magnetic core drill for up to 35 mm. - Small and powerful single-speed Eco magnetic core drill with basic functionality for core drilling and twist drilling on the construction site.
ราคาปกติ: 42,131 บาท
Special Price 9,900 บาท
-
เครื่องเดโม่ - สว่านแท่นแม่เหล็กไฟฟ้าไฟน์ รุ่น KBE 35
เจาะดอกเจ็ทบอสรูโตสุดได้ 35 ม.ม. ลึก 50 ม.ม., เจาะดอกเกลียวรูโตสุด 13 ม.ม., หัวจับดอกแบบ Weldon
Eco magnetic core drill for up to 35 mm. - Small and powerful single-speed Eco magnetic core drill with basic functionality for core drilling and twist drilling on the construction site.
ราคาปกติ: 42,131 บาท
Special Price 9,900 บาท
-
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC Tromb 400 c/L/a
Dust Control DC Tromb 400 c/L/a, Single Phase, 3000watt, Flow max 420 m3/h
- Tackles up to 420 m3/h
- Handles all kinds of fine dusts and materials created on construction sites as well as dust from many other industrial factory processes
- Equipped with a patented self-cleaning filter (washable polyester) and a H13-filter
- Compact and robust - easy to move and transport
- Signal lamp showing when it's time to clean the filter
- Puncture proof wheels of ”non marking-type”, loackable to enable the user to work on uneven ground0 บาท -
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 2900 c/L/a
Dust Control DC 2900 c/L/a Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h
0 บาท -
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 XL with Auto Start
Dust Control DC1800 XL Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 60L Container
- Especially suited for parquet grinding and other working operations that produce light dust
- Suitable for general cleaning and source extraction from handheld power tools (with up to 5” suction casings) and small table saws.
- Slim, lightweight and ideal for those that need a highly portable machine that is powerful enough for source extraction.
- Equipped with a steel container0 บาท -
เครื่องดูดฝุ่นอุตสาหกรรม Dustcontrol รุ่น DC 1800 H with Auto Start
Dust Control DC1800 H Vacuum with Autostart, Single Phase, 1285watt, Flow max 205 m3/h, 20L Container
0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 930 Reverse
Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.
Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZBevel Length
max 59 mmBevel Angle
0° – 60°Plate Thickness
8 – 60 mm (*) 8 – 100 mmFeeding Speed
0 -1.4 mt/min0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Big Plus
Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW. The four feeding wheels and machine design make this one of the most rigid machines on the market.
Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZBevel Length
max 77 mmBevel Angle
15° – 80° (*) 0°-80°Plate Thickness
8 – 100mm (*) 8- 200 mmFeeding Speed
0 -1.4 mt/min0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Plus
Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm.
Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 HzBevel Length
max 55 mmBevel Angle
15° – 80°Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mmFeeding Speed
0 -1.4 mt/min0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900
Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute. The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels.
Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 HzBevel Length
max 55 mmBevel Angle
15° – 60°Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mmPipe
Ø min 3000 mmFeeding Speed
0 -1.4 mt/min0 บาท -
เครื่องเลื่อยตัดและมิลลิ่งท่อไฟน์ RSG/RDG 1500
The simple solution for creating and maintaining pipe systems: FEIN pipe milling cutters for precise sawing and cutting results.
- Safe working: The feed can be switched on and off to improve operating safety. The safety slipping clutch protects the feed gearbox from overload.
- Robust quality: The machine is perfectly suited to continuous and regular use in demanding operating conditions.
- Compact and space-saving: The shorter side plates reduce the working space around the pipe, as a result the machine can be used when space is extremely tight.
- Reliable guidance: The machine cuts through welded seams and doesn't slip on twocomponent pipes.
- Efficient and economical: The pipe milling machine is ready for use in no time. All cuts are performed reliably and precisely; the investment pays off thanks to the long service life of the machine.
0 บาท -
เครื่องเลื่อยตัดท่อไฟน์ STS 325 R (แบบใช้ลม)
Hacksaws for pipes up to Ø 440 mm* with chain extention
Powerful hacksaw for pipes and profiled sections.
- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.
- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].
- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.0 บาท -
เครื่องเลื่อยตัดท่อไฟน์ AStxe 649-1 (ปรับระยะชักได้)
Hacksaws for pipes up to Ø 440 mm* with chain extention
Powerful hacksaw for pipes and profiled sections.
- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.
- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].
- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.0 บาท -
เครื่องเลื่อยตัดท่อไฟน์ AStx 649-1
Hacksaws for pipes up to Ø 440 mm* (with chain extention)
Powerful hacksaw for pipes and profiled sections.
- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.
- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].
- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.0 บาท