คุณยังไม่มีสินค้าในรถเข็น
สินค้าทั้งหมด
-
เครื่องเดโม่ - บล็อกกระแทกไร้สาย ไฟน์ 18V. M27 รุ่น ASCD 18-1000 W34 (พร้อมอุปกรณ์แท่นชาร์จ แบเตอรี่ 1 ก้อน)
สิ่งที่แนบมาด้วย: 1 แบตเตอรี่, 1 กล่อง , 1 แท่นชาจท์Brushless Cordless impact wrench/driver
Cordless impact wrench/driver with brushless motor and 6-stage torque setting. For metric screwdriving applications up to M27.
ราคาปกติ: 17,750 บาท
Special Price 9,080 บาท
-
เครื่องเดโม่ - เครื่อง Tap Auto AGWP10 18V (พร้อมอุปกรณ์แท่นชาร์จ แบเตอรี่ 1 ก้อน)
Cordless thread drill up to M 10 Fast, accurate thread drill with reversing gear for shorter working times.สิ่งที่แนบมาด้วย: 1 แบตเตอรี่, 1 กล่อง , 1 แท่นชาจท์
ราคาปกติ: 24,900 บาท
Special Price 12,000 บาท
-
ไขควงกระแทกไร้สาย metabo SSD 18 LT 200 BL (เครื่องเปล่าพร้อมกล่อง)
- Speed/torque levels: 3
- Battery voltage: 18 V- Maximum torque: 200 Nm- Bit retainer: Hexagon recess 1/4" (6.35 mm)ราคาปกติ: 6,955 บาท
Special Price 5,564 บาท
-
ไขควงกระแทกไร้สาย metabo SSD 18 LTX 200 BL (เครื่องเปล่าพร้อมกล่อง)
- Speed/torque levels: 12- Battery voltage: 18 V- Maximum torque: 200 Nm / 150 ft. lbs- Bit retainer: Hexagon recess 1/4" (6.35 mm)ราคาปกติ: 8,025 บาท
Special Price 6,420 บาท
-
บล็อกกระแทกไร้สาย metabo SSW 18 LT 300 BL (เครื่องเปล่าพร้อมกล่อง)
- Speed/torque levels: 3- Battery voltage: 18 V- Maximum torque: 300 Nm- Torque Adjust: 3 steps- Bit retainer: Male square 1/2" (12.70 mm)ราคาปกติ: 7,169 บาท
Special Price 5,735 บาท
-
บล็อกกระแทกไร้สาย metabo SSW 18 LTX 300 BL (เครื่องเปล่าพร้อมกล่อง)
- Speed/torque levels: 12- Battery voltage: 18 V- Maximum torque: 300 Nm / 220 ft. lbs- Bit retainer: Male square 1/2" (12.70 mm)ราคาปกติ: 9,630 บาท
Special Price 7,704 บาท
-
บล็อกกระแทกไร้สาย metabo SSW 18 LTX 400 BL (เครื่องเปล่าพร้อมกล่อง metaBOX)
- Speed/torque levels: 12
- Battery voltage: 18 V- Maximum torque: 400 Nm / 295 ft. lbs- Bit retainer: Male square 1/2" (12.70 mm)13,250 บาท -
สว่านต๊าปเกลียวอัตโนมัติแบบไร้สาย 18V metabo GB 18 LTX BL Q I (เครื่องเปล่าพร้อมกล่อง)
- Battery voltage: 18 V
- Maximum torque - soft: 65 Nm / 575 in-lbs
- Maximum torque, hard: 130 Nm / 1151 ft. lbs- Max. thread diameter: M 12 (1/2" UNC/UNF)15,515 บาท -
สว่านไขควงกระแทกไร้สาย 18V metabo SB 18 LTX BL Q I (เครื่องเปล่าพร้อมกล่อง)
- Battery voltage: 18 V
- Maximum torque - soft: 65 Nm / 575 ft. lbs
- Maximum torque, hard: 130 Nm / 1151 ft. lbs
- Drill-Ø masonry: 16 mm / 5/8 "- Drill Ø steel: 13 mm / 1/2 "
- Drill-Ø soft wood: 68 mm / 2.68 "- No-load speed: 0 - 550 / 0 - 2000 rpmราคาปกติ: 12,840 บาท
Special Price 10,272 บาท
-
เครื่องเดโม่ - สว่านแท่นแม่เหล็กไฟฟ้าไฟน์ รุ่น KBE 35 (#4)
S/N: 2016-09.400081
เจาะดอกเจ็ทบอสรูโตสุดได้ 35 ม.ม. ลึก 50 ม.ม., เจาะดอกเกลียวรูโตสุด 13 ม.ม., หัวจับดอกแบบ Weldon
Eco magnetic core drill for up to 35 mm. - Small and powerful single-speed Eco magnetic core drill with basic functionality for core drilling and twist drilling on the construction site.
ราคาปกติ: 42,131 บาท
Special Price 9,900 บาท
-
เครื่องเดโม่ - สว่านแท่นแม่เหล็กไฟฟ้าไฟน์ รุ่น KBE 35 (#3)
S/N: 2016-09.400079
เจาะดอกเจ็ทบอสรูโตสุดได้ 35 ม.ม. ลึก 50 ม.ม., เจาะดอกเกลียวรูโตสุด 13 ม.ม., หัวจับดอกแบบ Weldon
Eco magnetic core drill for up to 35 mm. - Small and powerful single-speed Eco magnetic core drill with basic functionality for core drilling and twist drilling on the construction site.
ราคาปกติ: 42,131 บาท
Special Price 9,900 บาท
-
เครื่องเดโม่ - สว่านแท่นแม่เหล็กไฟฟ้าไฟน์ รุ่น KBE 35
เจาะดอกเจ็ทบอสรูโตสุดได้ 35 ม.ม. ลึก 50 ม.ม., เจาะดอกเกลียวรูโตสุด 13 ม.ม., หัวจับดอกแบบ Weldon
Eco magnetic core drill for up to 35 mm. - Small and powerful single-speed Eco magnetic core drill with basic functionality for core drilling and twist drilling on the construction site.
ราคาปกติ: 42,131 บาท
Special Price 9,900 บาท
-
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 930 Reverse
Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.
Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZBevel Length
max 59 mmBevel Angle
0° – 60°Plate Thickness
8 – 60 mm (*) 8 – 100 mmFeeding Speed
0 -1.4 mt/min0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Big Plus
Faster machining and longer insert life is the benchmark of this machine. This rigid and durable unit has the highest cutter motor power at 5.5 kW. The four feeding wheels and machine design make this one of the most rigid machines on the market.
Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZBevel Length
max 77 mmBevel Angle
15° – 80° (*) 0°-80°Plate Thickness
8 – 100mm (*) 8- 200 mmFeeding Speed
0 -1.4 mt/min0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900 Plus
Machine a bevel in a metal plate with a chamfer angle of 15° to 80° at a linear travel speed of up to 1.4 meter/minute. The standard model ART.900 Plus machine will bevel plates with a thickness from 8 mm to 60 mm, with options to bevel a thickness less than 8 mm, or 8 mm to 200 mm.
Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 HzBevel Length
max 55 mmBevel Angle
15° – 80°Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mmFeeding Speed
0 -1.4 mt/min0 บาท -
เครื่องบากเหล็กแผ่นอัตโนมัติ OMCA art. 900
Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute. The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels.
Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 HzBevel Length
max 55 mmBevel Angle
15° – 60°Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mmPipe
Ø min 3000 mmFeeding Speed
0 -1.4 mt/min0 บาท -
เครื่องเลื่อยตัดและมิลลิ่งท่อไฟน์ RSG/RDG 1500
The simple solution for creating and maintaining pipe systems: FEIN pipe milling cutters for precise sawing and cutting results.
- Safe working: The feed can be switched on and off to improve operating safety. The safety slipping clutch protects the feed gearbox from overload.
- Robust quality: The machine is perfectly suited to continuous and regular use in demanding operating conditions.
- Compact and space-saving: The shorter side plates reduce the working space around the pipe, as a result the machine can be used when space is extremely tight.
- Reliable guidance: The machine cuts through welded seams and doesn't slip on twocomponent pipes.
- Efficient and economical: The pipe milling machine is ready for use in no time. All cuts are performed reliably and precisely; the investment pays off thanks to the long service life of the machine.
0 บาท -
เครื่องเลื่อยตัดท่อไฟน์ STS 325 R (แบบใช้ลม)
Hacksaws for pipes up to Ø 440 mm* with chain extention
Powerful hacksaw for pipes and profiled sections.
- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.
- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].
- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.0 บาท -
เครื่องเลื่อยตัดท่อไฟน์ AStxe 649-1 (ปรับระยะชักได้)
Hacksaws for pipes up to Ø 440 mm* with chain extention
Powerful hacksaw for pipes and profiled sections.
- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.
- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].
- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.0 บาท -
เครื่องเลื่อยตัดท่อไฟน์ AStx 649-1
Hacksaws for pipes up to Ø 440 mm* (with chain extention)
Powerful hacksaw for pipes and profiled sections.
- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.
- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].
- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.0 บาท -
ประแจทอร์คขันเครื่องแลกเปลี่ยนความร้อน รุ่น R/SG
- Continuous rotation tightening or loosening of spindles or long threaded bolts. Ideal for bolting connections on plate heat exchangers.
- Torque range of the pneumatic driven types: alkitronic RCL two gear torque multiplier with radial gearing from 590 Nm to 4,840 Nm, alkitronic CLS-SG with tangential gearing from 1,280 Nm to 3,780 Nm.
- Torque range of the electric driven types: alkitronic EF-R / EFCip-R / EF-SG / EFCip-SG: from 560 Nm to 3,780 Nm.0 บาท -
ประแจทอร์คทดแรงแบบแมน่วล รุ่น Missing Link/ XCE Link
The alkitronic® Norwolf Missing Link™ - the most revolutionary manual torque multiplier for applications where standard tools don´t fit.
The alkitronic® Norwolf XCE Link™ is essentially a Missing Link™ with the ability to turn continuously.
0 บาท -
ประแจทอร์คทดแรงแบบแมน่วล รุ่น M
- alkitronic M manual torque multiplier - for energy independent tightening and loosening of heavy-duty bolting connections.
- Torques from 200 Nm up to 50000 Nm.
- The ideal torque tool in high explosion-risk areas.
- alkitronic M provide safe, economic, problem-free operation. They replace impact wrenches, pipe extensions and other inadequate methods.0 บาท -
ปั๊มไฮดรอลิคแบบใช้ลม รุ่น LHP
- The hydraulic pump is robust and powered with a unique worldwide proven pneumatic drive.
- Perfect for use in explosion risk areas. Optional with ATEX-certification: II 2 GD c IIB T6.
- Simple operation and infinitely adjustable pressure setting, up to 700 bar.
- Ideal working conditions with an air pressure of 2-7 bar and a flow rate of approx. 10-15 l/sec.0 บาท