สินค้าทั้งหมด

Garant CEE 2 IP44 cable reel for site & industry 25m H07RN-F 3G2,5

-  2-socket cable reel drum with 25m cable length H07RN-F 3G2,5 and IP44 protection against splashing of water
-  Extension cable made from Rubber-Neoprene for outdoors and use on sites
-  Ergonomic cable guide handle for easy rewinding, carrying, and cable storage
-  Robust cable reel (230 V/16 A) with single pole safety cut-off and overheating protection

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

CEE plug 400V / 32A IP44

Screwless connection technology.

Unique flexible beveling machine able to bevel plates and tubes, including largediameters. Its flexibility, versatility and high speed bevel, make the CHP 12 the first model to be sold all over the world with years of international success. 

The beveler CHP 12 remains the most efficient and reliable beveling machine on the market. It replaces manual tiresome processes for workers, avoiding high production costs for the company.
Proven high cost-effectiveness: 6 meter plates beveled in less than 3 minutes

Benefits of plate and tube beveler CHP 12

• High average cutters lifespan : about 1.000 m
• High profitability: Extremely low cost/beveled meter/ minute
• Zero maintenance.
• Self-feed.
• Easy-to-handle and easy to use.
• Flexible.

LED worklight with 360° all-round lighting / Work light 50W (with 5m cable and splash-proof socket, glare-free light, with on/off switch)

- LED Worklight 50W with 5m cable (H07RN-F 3G1,5) provides glare-free, low-shadow 360° room illumination and can also be operated standing, hanging or mounted on a tripod

- LED Floodligh 360° with on/off switch is perfectly suited for permanent outdoor use thanks to the IP54 protection class (dust and splash-proof) and the oil-resistant RN    cable

- Site light made of robust, break- and impact-resistant plastic housing with splash-proof socket with self-closing cover - ideal for painting work or use on construction sites The robust and stable LED work light with practical hook is operated via the on/off switch, which can also be used to select the various light functions (100 - 50 %)

Brennenstuhl rechargeable LED Work Light RUFUS / LED Workshop Light outdoor (1500lm, 15W, 5 Modes, Powerbank, USB-Charger,made of die-cast aluminum)

- Extremely robust LED work light with rechargeable battery provides always bright work light in places without power supply - IP65 dust-tight and protected against water-jets, indoor and outdoor use

- LED floodlight with 5 lighting modes 100% - 75% - 50% - 25% - 10% and Powerbank function (USB charging connection 1 A) for devices with USB charging cable such as Smartphones, Tablets, etc.

- The LED floodlight is shockproof and drop-proof (from up to 3m high) - with edge protection made of high-quality plastic and a die-cast aluminum housing - ideal for construction sites, workshops, …

- Workshop light with charging indicator, power bank function for comfortable charging of e.g. smartphones (charging connection type C), and stable, multi-stage folding frame

4 LED Rechargeable Hand Lamp HL DA 40 MH 200lm