สินค้าทั้งหมด

Machine a V bevel in a plate up to 200 mm thick for butt welding or edge conditioning with a chamfer angle of 15° to 60° at a automatic feed speed of up to 1.4 meters/minute.  The rigid frame incorporates steel where required and aluminum casting where permissible to optimize strength and ergonomics. The motorized feeding process is achieved over hardened work plates with sliding rollers, all driven by two 90 shore polyurethane wheels. 

Motor Power
230/400 Volt, 3 Phase
4kw (4000W), 50/60 Hz

Bevel Length
max 55 mm

Bevel Angle
15° – 60°

Plate Thickness
8 mm – 60 mm (*) 8 mm – 100 mm / 8 mm – 200 mm

Pipe
Ø min 3000 mm

Feeding Speed
0 -1.4 mt/min

Machine a reverse downside chamfer with an angle of 0° to 60°, or a square edge condition a plate up to 100 mm thick at an automatic feed speed of up to 1.4 meters/minute.

Motor Power
230/400 Volt, 3 Phase
5,5KW.( 5500W) 50/60 HZ

Bevel Length
max 59 mm

Bevel Angle
0° – 60°

Plate Thickness
8 – 60 mm (*) 8 – 100 mm

Feeding Speed
0 -1.4 mt/min

PORTABLE CHAMFER MILLING MACHINE
K-HFM/KaKi 2014-1-8-E

45°, 30°, 60° chamfers

The most economic way to mill 45°, 30°, 60° chamfers. The chamfer milling machine is used whenever predefined chamfers must be machined and is employed for the preparation of weld seams. This handy and powerful machine can also be utilised to produce visible edges. Furthermore, the machine can also be used to deburr sharp corners safely. Equipped with a radial mechanical stop, which is used as guide roller, the tool can also be used to machine inside contours and pipes.

Application range
· Sheet metal, pipes, flanges, inside contours, bores, etc.
· Steel, aluminium, stainless steel, castings, non-ferrous, metals, and plastics

Rail drilling machine Ø 12 - 36 mm / 12 kg

The Euroboor RAIL.40S rail drilling machine is specifically designed for drilling in rails. Our electric rail drilling machine is available in various rail adapter versions, ensuring you can always choose the right rail adapter for your drilling job. This machine is suitable for drilling holes up to 36 mm. Our portable RAIL.40S rail drilling machine has a powerful 1,150 W high efficiency motor, with less heat generation and thus a longer lifespan.

Our RAIL.40S rail drilling machine comes with six different rail adapter versions: S49, S54, TR68, UIC50, UIC54 and UIC60.

Magnetic drilling machine Ø 12 - 55 mm / 16 kg

The portable Euroboor TUBE.55S/T magnetic core drilling machine is suitable for both flat and pipe material and for both drilling and tapping. The magnet of this magnetic core drilling machine offers incredibly strong grip, even on steel as thin as 3 mm. This magnetic core drilling machine cuts holes in metal up to 55 mm and can be used on tube material with a diameter of 80 mm and larger without any effort because of its pivoting magnet. The TUBE.55S/T benefits from Smart Restart technology, a digital display showing the ideal working load and automatic motor shut-off when displacement in any direction is detected by the GYRO-TEC sensor.

Magnetic drilling machine Ø 12 - 80 mm / 27.3 kg

Thanks to its four-speed oil lubricated gearbox our portable Euroboor ECO.80S+ magnetic core drilling machine is able to tackle twist drilling tasks just as easily as big diameter annular cutter challenges. The innovative electronics  in this magnetic core drilling machine offer more safety, significantly reduce the risk of damage of the machine, tool and workpiece and protects the user in case of excessive vibrations or sudden displacement. The lifespan is considerably longer and you avoid high maintenance costs.