You have no items in your shopping cart.
All Products
-
ประแจทอร์คไฮดรอลิค รุ่น AX
- Hydraulic torque wrenches with two hydraulic hose system for tightening or loosening heavy bolt connections.
- alkitronic AX convertible type torque wrench up to 49,240 Nm. Drive element with interchangeable hexagon link from 17 to 145 mm.0 THB -
ประแจทอร์คไฮดรอลิค รุ่น AT
- Hydraulic torque wrenches with two hydraulic hose systems for tightening and loosening heavy bolt connections.
- alkitronic AT hydraulic torque wrenches from 110 up to 72.000 Nm for threads of M14 and larger.
- No checking needed: High repeatability ± 3% for the same bolting process.0 THB -
ปั๊มไฮดรอลิค รุ่น NOVA
- Electric driven hydraulic pump, usable worldwide 100-253 V / 45-66 Hz, up to 700 bar / 10,000 psi for hydraulic wrenches with single or doubleacting cylinders
- Duo- or Quattro version (for 2 or 4 wrenches etc.) optional
- Robust compact design for use on the roughest construction sites0 THB -
ปั๊มไฮดรอลิค รุ่น VELOX
- Worldwide unique electrical hydraulic pump with protection class IP65. Protected against rain, splash water and dust deposit and therefore no costly downtime.
- Simple operation and infinitely adjustable pressure setting up to 700 bar.
- Suitable for 110V or 230V main grids and voltage controlled mobile power units.0 THB -
ปั๊มไฮดรอลิค รุ่น LEVA
- The alkitronic LEVA is a robust, powerful, electric driven hydraulic pump.
- Small, low weight, reliable - ideal for service use.- Simple operation, continuously adjustable up to 700 bar.
- Trouble-free operation on the 230 V main grids as well as on voltagecontrolled mobile generators.
0 THB -
ปั๊มไฮดรอลิคแบบใช้ลม รุ่น LHP
- The hydraulic pump is robust and powered with a unique worldwide proven pneumatic drive.
- Perfect for use in explosion risk areas. Optional with ATEX-certification: II 2 GD c IIB T6.
- Simple operation and infinitely adjustable pressure setting, up to 700 bar.
- Ideal working conditions with an air pressure of 2-7 bar and a flow rate of approx. 10-15 l/sec.0 THB -
ประแจทอร์คทดแรงแบบแมน่วล รุ่น M
- alkitronic M manual torque multiplier - for energy independent tightening and loosening of heavy-duty bolting connections.
- Torques from 200 Nm up to 50000 Nm.
- The ideal torque tool in high explosion-risk areas.
- alkitronic M provide safe, economic, problem-free operation. They replace impact wrenches, pipe extensions and other inadequate methods.0 THB -
ประแจทอร์คทดแรงแบบแมน่วล รุ่น Missing Link/ XCE Link
The alkitronic® Norwolf Missing Link™ - the most revolutionary manual torque multiplier for applications where standard tools don´t fit.
The alkitronic® Norwolf XCE Link™ is essentially a Missing Link™ with the ability to turn continuously.
0 THB -
ประแจทอร์คขันเครื่องแลกเปลี่ยนความร้อน รุ่น R/SG
- Continuous rotation tightening or loosening of spindles or long threaded bolts. Ideal for bolting connections on plate heat exchangers.
- Torque range of the pneumatic driven types: alkitronic RCL two gear torque multiplier with radial gearing from 590 Nm to 4,840 Nm, alkitronic CLS-SG with tangential gearing from 1,280 Nm to 3,780 Nm.
- Torque range of the electric driven types: alkitronic EF-R / EFCip-R / EF-SG / EFCip-SG: from 560 Nm to 3,780 Nm.0 THB -
Compact angle grinders WSG 17-150 PR DEMO
Hacksaws for pipes up to Ø 440 mm* (with chain extention)
Powerful hacksaw for pipes and profiled sections.
- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.
- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].
- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.0 THB -
Compact angle grinders WSG 17-150 PR DEMO
Hacksaws for pipes up to Ø 440 mm* with chain extention
Powerful hacksaw for pipes and profiled sections.
- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.
- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].
- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.0 THB -
Compact angle grinders WSG 17-150 PR DEMO
Hacksaws for pipes up to Ø 440 mm* with chain extention
Powerful hacksaw for pipes and profiled sections.
- Ideally suited for trimming pipes and shaped section made of steel, cast-iron, autoclaved aerated concrete and plastics.
- Clamp and feed device available for profiles and pipes from Ø 3-1/8 in [80 mm] to Ø 24 in [400 mm].
- Especially suitable for sandwich material and layers of different materials.
- Adjustable clamping devices permit mitre cuts up to 45° as well.
* With chain extension.0 THB -
Compact angle grinders WSG 17-150 PR DEMO
The simple solution for creating and maintaining pipe systems: FEIN pipe milling cutters for precise sawing and cutting results.
- Safe working: The feed can be switched on and off to improve operating safety. The safety slipping clutch protects the feed gearbox from overload.
- Robust quality: The machine is perfectly suited to continuous and regular use in demanding operating conditions.
- Compact and space-saving: The shorter side plates reduce the working space around the pipe, as a result the machine can be used when space is extremely tight.
- Reliable guidance: The machine cuts through welded seams and doesn't slip on twocomponent pipes.
- Efficient and economical: The pipe milling machine is ready for use in no time. All cuts are performed reliably and precisely; the investment pays off thanks to the long service life of the machine.
0 THB -
Cutting disc XT8 Size 125x0.8x22,23
จำนวน 50 ใบ / 1 กล่อง
Stainless steel
Steel
The 0.8 mm cutting disc with ultra low-noise operation. Produces a precise and nearly burr-free cut.
2,130 THB -
Cutting Disc XT10 Size 125x1,0x22,23
จำนวน 50 ใบ / 1 กล่อง
Stainless steel
Steel
Ultra high-performance thin cutting disc for demanding user requirements.
2,590 THB -
Cutting disc FTK33 size100x2.0x16.00 mm.
จำนวน 25 ใบ / 1 กล่อง
Steel
Versatile cutting disc that offers a good price-performance ratio.
920 THB -
Cuttoinf disc FTK33 size 230x3.0x22.23 mm.
จำนวน 25 ใบ / 1 กล่อง
Steel
Versatile cutting disc that offers a good price-performance ratio.
2,480 THB -
Grinding Disc RS38 Size 100x4.0x16.0 mm.
จำนวน 25 ใบ / 1 กล่อง
Stainless steelSteelHigh-performance grinding disc offering superior stock removal, good service life and a good price-performance ratio.1,080 THB -
BDB 819 Diamond wet core drilling machine up to Ø 200 mm
Wet core drilling machine for drill stand and hand guided core drilling in hard stone from Ø 30 mm up to 200 mm (8")
- Wide range of application through a 3-speed gear box with high performance lubrication
- The machine can be hand-guided precisely
- With drill stand, very accurate, even with bigger diameters
- Attachable water jet
- Clamping collar Ø 60 mm
- MADE IN GERMANY0 THB -
BDB 819 + Drill Stand Diamond wet core drilling machine up to Ø 200 mm
Wet core drilling machine include drill stand and hand guided core drilling in hard stone from Ø 30 mm up to 200 mm (8")
- Wide range of application through a 3-speed gear box with high performance lubrication
- The machine can be hand-guided precisely
- With drill stand, very accurate, even with bigger diameters
- Attachable water jet
- Clamping collar Ø 60 mm
- MADE IN GERMANY0 THB -
BDB 817 + Drill Stand Diamond Wet Core Drilling Machine up to Ø 160 mm
Wet core drilling machine include drill stand and hand guided core drilling in hard stone from Ø 30 mm up to 160 mm (6")
- The machine can be hand-guided precisely
- With additional drill stand to cut larger diameters
- 2-speed gear box with a special lubrication
- Clamping collar Ø 60 mm
- MADE IN GERMANY0 THB -
BDB 817 Diamond Wet Core Drilling Machine up to Ø 160 mm
Wet core drilling machine in hard stone from Ø 30 mm up to 160 mm (6")
- The machine can be hand-guided precisely
- With additional drill stand to cut larger diameters
- 2-speed gear box with a special lubrication
- Clamping collar Ø 60 mm
- MADE IN GERMANY0 THB -
BDB 835 Diamond Wet Core Drilling System Up to Ø 350 mm
Diamond wet core drilling machine for highly precise wet core drilling in extremely hard stone up to ø16"
- Powerfull wet core drilling with 4,500 maximum power and 3,000W nominal power output - up to 185Nm torque
- 3-gear box with special gear case hardened
- Integrated handle for easy transport
- Machine and drill rig can be installed by one person only
- Scope of supply: core drilling machine BDB 835, fixing set and tools0 THB -
BDB 8131 Diamond Wet Core Drilling Machine up to Ø 102 mm
Diamond wet core drilling machine for hand guided core drilling in hard stone up to Ø4" (102 mm), with drill stand up to Ø5" (125 mm)
- 2 gear box with special continuous greasing
- Integrated water leveling
- Thread 60 mm
- MADE IN GERMANY0 THB